Specifications - Behringer Europower PMP500 Manual

EUROPOWER
PMP500

Specifications

Microphone Inputs
Type XLR, electronically balanced
Mic E.I.N. (20 Hz - 20 kHz)
@ 0 Ω source impedance -122 dB / -125 dB A-weighted
@ 50 Ω source impedance -122 dB / -125 dB A-weighted
@ 150 Ω source impedance -121 dB / -124 dB A-weighted
Gain +29 dB, +9 dB with pad
Max. input level +12 dBu @ 10 dB gain
Impedance 2.0 kΩ balanced /
1.0 kΩ unbalanced
Phantom power +15 V
Mono Line Inputs
Type 1/4" TRS connector
Impedance Approx. 20 kΩ balanced,
10 kΩ unbalanced
Max. input level +21 dBu
Equalizer
Low 80 Hz / ±15 dB
High 12 kHz / ±15 dB
For service, support or more information contact the BEHRINGER location nearest you:
Europe
MUSIC Group Services UK
Tel: +44 156 273 2290
Email: CARE@music-group.com
Technical specifications and appearances are subject to change without notice and accuracy is not guaranteed. BEHRINGER, KLARK TEKNIK, MIDAS, BUGERA, and TURBOSOUND are part of the MUSIC Group (music-group.com). All trademarks are the property of their
respective owners. MUSIC Group accepts no liability for any loss which may be suffered by any person who relies either wholly or in part upon any description, photograph or statement contained herein. Colors and specifications may vary from actual product. MUSIC Group
products are sold through authorized fullfillers and resellers only. Fullfillers and resellers are not agents of MUSIC Group and have absolutely no authority to bind MUSIC Group by any express or implied undertaking or representation. This manual is copyrighted.
No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording of any kind, for any purpose, without the express written permission of MUSIC Group IP Ltd. ALL RIGHTS RESERVED.
© 2013 MUSIC Group IP Ltd. Trident Chambers, Wickhams Cay, P.O. Box 146, Road Town, Tortola, British Virgin Islands.
Main Mix System Data
Noise
Main mix @ -∞,
channel fader @ -∞
Main mix @ 0 dB,
channel fader @ -∞
Main mix @ 0 dB,
channel fader @ 0 dB
Frequency response
(amplifier output)
Amplifier (Per Channel)
Max output power
Loudspeaker Outputs
Type
Load impedance
DSP
Type
Converter
Sampling rate
Wireless System
BEHRINGER ULM Series
USB Receiver
USA/Canada
MUSIC Group Services NV Inc.
Tel: +1 702 800 8290
Email: CARE@music-group.com
-106 dB / -110 dB A-weighted
-87 dB / -90 dB A-weighted
-80 dB / -82 dB A-weighted
20Hz – 20kHz (+0/-3dB)
250 W* + 250 W*
1/4" TS connector
4-8 Ω
KLARK TEKNIK
24-bit Sigma-Delta
40 kHz
USB socket accepts signals from 2
independent BEHRINGER ULM mics
Japan
MUSIC Group Services JP K.K.
Tel.: +81 3 6231 0454
Email: CARE@music-group.com
Display
Type 2-digit, 7-Segment LED
Power Supply
Mains voltage 100-120 V~ (for UL, JP, CA);
220-240 V~ (for EU, AU, UK, CN)
Fuse 100-120 V~, T 5 A H 250 V;
220-240 V~, T 3.15 A H 250 V
Power consumption 90 W
Mains connection Standard IEC receptacle
Dimentions/Weight
Dimensions (H x W x D) 4.8 x 15.4 x 16.7"
122 x 390 x 425 mm
Weight 14 lbs / 6.3 kg
*Independent of limiters and driver protection circuits
Please note these specifications are preliminary and conceptual in nature, and as such are subject
to change as product development progresses. This information is supplied for market research
purposes only and is not to be made public in any manner. This document is solely the property of
The MUSIC Group, or one of its subsidiaries, and must be surrendered upon request of the owner.
Page 7 of 7