Advertisement
Multi-function Control Area
1.
"
"
: Select the following four submenu: <tone>, <time>, <alarm>, <source>. Or enter to the
next menu.
2. "
": Return to the previous menu.
3.
"
"
: Adjust settings.
For example:
a. When you want to
set the time, press the "
", followed by the "
figures of hours, then press the
again, the time on the screen will flicker continuously to
b. When you want to
change the tone settings, scroll to the <tone> menu
"tone
menu .
" Press the "
<bass>. If you want to adjust <SW>, press
adjust the <SW> volume.
c. When you want to set
the
"source
menu .
" Press the "
<FM.s>. If you want to choose <iPod.s>, press
function has finished. The other
d.
When you want to set alarm, press the "
1
", followed by the "
adjust the
hours, then press
adjusting the minutes setting,
alarm setup. After setting alarm, press the
can
press the
"
"; "
sound module, the system will turn to FM input mode;
the system will turn to iPod input mode.
FM Control Area
a. Press "
" and select FM mode, the LCD will display the last tuned channel, for example:
87.50MHz.
b. Use "
,
" to adjust radio frequency.
c. The number keys (1-10) are used to save up to 10 channels. Tune to your desired FM channel and
hold one of the number keys for 2 seconds to assign that number key to that channel. Anytime you
want to listen to the saved channel, just press on the assigned key number.
" key to enter time setting mode. Press "
"
"
key to set the minutes, after reset it, press
" key to scroll through the
"
the alarm sound module, scroll to the <source> menu
"key to scroll through the
<FM.s>
options have the same operation.
" key and scroll to the <alarm> menu by press"
" key to enter alarm setting mode. Then Press "
"
"
key to
toggle to the minutes setting.
the time on the screen will flicker
"
" or "
"
" key and scroll to the <time> menu by press "
confirm successful
three options: <SW>,<treb>,
"
to enter the SW menu
"
"
" then the LCD flicker, it suggest this
momentarily to confirm successful
"
key to turn the alarm on. When alarm is on,
key to turn off the alarm,
if you choose <iPod.
.5.
"
to reset the
"
"
key
setup.
and press
"
"
to enter the
", p
ress
"
and press
"
"
to enter
two options: <iPod.s>,
"
Press
"
"
key
after
if you choose <FM.
s> alarm
s> alarm sound module,
"
to
to
you
Advertisement
