Table of Contents
Advertisement
battery liquid leakage, corrosion, causing damage to the remote control.
5. Don't put the remote control in extremely hot or moist place.
6.
Don't disassemble remote control,
7.
Don't let light point-blank remote or panel infrared sensor, so as not
to
interfere with
remote signal.
8.
Within
5
meters away from the machine in
30
G
Angle and used only within the scope
of the remote control best effect.
Basic Function Operation
1. Operation
1) Connect the machine to electMc wnh power .upply(1 00-240V) . Red light.haws power
on and charging.
2)
Switch the
ON
button on the machine for screen display. Leaving the power switch
OFF
and unplug the adapter if not in using
3) Links with the
'TV
set, ple.se change the
'TV
model inm AV slate
2. TFT pictul'II adjustment
Press LCD
MENU
enter into LCD setup menu for adjustment.
3. Place disc
1) Press OPEN to open the disc cover
2) Hold the edge of the disc and buckle it slightly on the pivot.
4. Play IPause
1) This player will automatically play onca the disc is loaded.
2) Press
~
I
kay,
to
pause
3) Press lit>
I
key once more to resume play.
5. Character display
Press aSD
to
show disc information and operation function and press aSD once again
to
tum all the display.
6. DVD disc menu play
Some DVD discs are recorded with title menu or chapter menu.
When
MENU
key on the remote controller is pressed, the screen will display 1he menu at
Advertisement
Table of Contents
