Specifications - Casio 3416 Operation Manual

Operation Guide 3416
To test the alarm sound
Hold down B while in the Alarm Mode to sound the alarm.
Note that pressing B also changes the alarm and the hourly time signal ON/OFF
settings.
E-20
A to return to the Dual Time Mode.
4. After you set the time, press
In the Dual Time Mode, the seconds count is synchronized with the seconds count
of the Timekeeping Mode.
In the Dual Time Mode, press B to toggle between the 12-hour and 24-hour
formats.
E-22
Dual Time
Other: LED (light-emitting diode); Vibration alarm
Battery: One lithium battery (Type: CR2032)
Battery life: 10 years under the following conditions
One 2-second light operation per day
One alarm operation per day
Note: One alarm operation is 20-second audible alarm or 10-second vibration
alarm.
E-24
Dual Time Mode
The Dual Time Mode lets you keep track of the time in
Current time
another time zone. You can also select the timekeeping
format (12-hour or 24-hour) separately from the
Timekeeping Mode.
To set the Dual Time
A while in the Dual Time Mode. The hour
1. Hold down
digits fl ash on the display because they are selected.
C to change the selection in the following
2. Press
sequence.
Minutes
Mode indicator
Hour
Hour
D to increase the selected digits and B to
3. Press
decrease them. Holding down either button changes
the selection at high speed.
Specifi cations
±
Accuracy at normal temperature: 30 seconds a month
Timekeeping: Hour, minutes, seconds, pm (P), day of the week, month, day
Time format: 12-hour and 24-hour formats
Calendar system: Full Auto-calendar pre-programmed from the year 2000 to 2099
Countdown Alarm
Measuring unit: 1/10 second
Input range: 1 second to 24 hours
Stopwatch
Measuring unit: 1/100 second
Measuring capacity: 23 hours 59 minutes, 59.99 seconds
Measuring modes: Elapsed time, split time and two fi nishes
Other: Auto-Start
Alarm: Daily alarm, hourly time signal
C
Minutes
E-21
E-23