In The Engine Compartment - BMW ActiveHybrid 3 Owner's Manual

In the engine compartment

1. Use the onboard vehicle tool kit to loosen
the three cover screws, arrow 1.
2. Pull up the holder, arrow 2.
3. Remove the cover from one side, arrow 3.
4. Press the four fasteners and remove the
cover.
Attaching the covers
1. When attaching the cover, make sure that all
four fasteners are engaged.
2. Attach the cover under the rubber lip and
then thread it between the bars.
3. Press down on the holder and tighten the
three screws.
Online Edition for Part no. 01 40 2 917 825 - II/13
Replacing components
In the cargo area
Raise the cargo floor panel.
Information on the fuse types and locations is
found on a separate sheet.
Mobility
193