Olympus Stylus Verve Basic Manual page 25

000e_kisohen.book Page 25 Friday, July 30, 2004 7:06 PM
Press the shutter button half-way.
When the focus and exposure are
locked, the green lamp lights
steadily.
When the flash is going to fire, the flash standby lamp lights.
If the green lamp blinks, this means that the focus is not yet locked. Press
the shutter button half-way again.
Press the shutter button all the
way (fully) down to take the
picture.
The picture is stored on the card.
The lamp on the camera blinks red while the picture is being stored on the
card.
Never open the card cover, or connect or disconnect the battery, AC adaptor
or power coupler while the lamp on the camera is blinking. The picture just
taken may not be stored and also the data of the pictures stored on the card
may be lost.
Memory gauge
The memory gauge lights up when
you take a picture. While the gauge
is lit, the camera is storing the
picture on the card. When the
memory gauge is fully lit (as shown
on right), no more pictures can be
taken. Wait until the gauge turns off
before taking the next picture.
Press the POWER switch to turn off the camera.
Taking still pictures
Lamp
e
P P
$ $
o
d
11 11
11
11
HQ HQ 2272*1704 2272*1704
Memory gauge
En
25