GE Profile PT920SM Datasheet page 2

PT920SM
GE Profile 30" Built-In Single Convection Wall Oven
™
Optional Undercounter Dimensions and Installation Information
Note: 36" ribbon cooktops are approved for use
over GE 30" single wall ovens only. 30" ribbon
cooktops are approved for use over GE 30" and
GE 27" single wall ovens. Refer to cooktop and
wall oven installation information packed with
products for current dimensional data.
Note: CleanDesign or Sealed Burner Gas
This installation is to achieve minimum gap
between bottom of countertop and control
panel. For this installation, the bottom trim will
not be flush with a typical 4" toe kick
Note: Cabinets installed adjacent to wall ovens
must have an adhesion spec of at least a 194°F
temperature rating.
Installation Information: Before installing,
consult installation instructions packed with
product for current dimensional data.
For answers to your Monogram, ®
GE appliance questions, visit our website at
®
ge.com or call GE Answer Center
800.626.2000.
With 36" Gas Cooktop
3-1/4
3-1/2" MIN.
Free space
30" built-in
oven
3/4" Support
4" To 4-1/2"
Gas or electric cooktops may be installed
over this oven. See cooktop installation
instructions for cutout size. See label on
top of oven for approved cooktop models.
GE Profile ™ or
service,
®
2 (two) 90°elbows &
sufficient pipe to
connect in adjacent
cabinet
Conduit
Junction box
(72" long)
for oven
Junction box in
1/2" Black
adjacent cabinet
iron pipe
for cooktop
Pressure
hook-up
regulator 22
Union
Power cord
Shut-off
for cooktop
valve
Right cabinet side
Side View
25
Top and/or side
fillers may be
necessary if unit
is positioned
between
27-1/4'' MIN.
existing cabinets
27-5/16'' MAX.
Cutout height
3/4'' Support
platform required
Match toe kick height
front and two sides
30" Oven W/ Rad. Cktp.
With 30" CleanDesign or Sealed Burner Gas Cooktop
Side View
1-1/2" Typical countertop
Free space
1-1/2" MIN.
30-7/16
Add suitable
filler to match
adjacent cabinets
when needed
to maintain toe
kick alignment
5-9/16"
Reference dim.
for MAX. support
height with typical
36" countertop
height
Junction box Gas
location connection
240/208V
5
23-1/2" MIN.
Cutout depth
28-1/2'' MIN.
28-5/8'' MAX.
Allow 11/16''
22'' MIN. above
overlap over side
support platform
edges of cutout
24
Specification Created 1/07
Power cord
Junction box(s) for
oven & radiant
cooktop 22" from
floor
27-1/4" MIN.
27-5/16" MAX.
36" Typical
Countertop height
Cutout height
22
Reference
5-9/16
Gas (including the pressure regulator) and
electrical connections for gas cooktop must
be located in an adjacent accessible location.
For a 30" gas cooktop, the connections are
more conveniently made to the right.
120 Volt
Outlet
1-1/2"
Countertop
36'' MIN.
4'' To 4-1/2 '' Toe kick allowable
Listed by
Underwriters
Laboratories
220239