TP-Link TL-WR710N Quick Installation Manual

Quick Installation Guide

150Mbps Wireless N Mini Pocket Router - Advanced Edition
TL-WR710N
MODEL NO.

Operating Modes

Wireless Router Mode (Default)
1
2
Create an instant password-protected wireless
network with an NAT Firewall and share internet with
multiple devices. This mode is suitable for hotel
rooms and home networks.
(Note: if the hotel's Internet has an authentication
process, you will need to authenticate only once and
only on one device)
Protected by NAT Firewall
Wired Ethernet
Connection
Instant Wireless Connection
1 Plug the TL-WR710N into a power outlet that is 2
near your modem or a wired ethernet connection.
Wait until the LED is blinking.
Wired Ethernet
Connection
Customizing your Wireless Network Name & Password (Optional)
1 Open a web browser and go to the page 2
http://tplinklogin.net.
http://tplinklogin.net
Enter the login username: admin and
password: admin.
admin

Package Contents

TL-WR710N Ethernet Cable
150Mbps Wireless N Mini Pocket Router - Advanced Edition
MODEL NO.
Resource CD for User Guide Only QIG
Client Mode
3 Repeater Mode
Use as a wireless adapter for wired-only Ethernet Repeat signal from an existing wireless network.
enabled devices. This mode is suitable for This mode is suitable to extend wireless coverage,
connecting Smart TVs, game consoles, or computers reaching devices that were previously too far from
to your wireless network. your primary router to maintain a stable wireless
connection.
The repeated signal will display the same network
name and password as your existing wireless
network.
If you are connecting the TL-WR710N directly to 3
your cable modem, you must first power reset the
modem and wait until its ONLINE LED is solid.
Then use an ethernet cable to connect to your
modem via the LAN/WAN port on the TL-WR710N.
If you are connecting the TL-WR710N to an existing
network, simply plug the ethernet cable into the
LAN/WAN port and to your network.
In either case, wait until the LED is solid blue.
USB Reset LAN/WAN LAN
eset LAN/WAN
To customise your Wireless Network Name Click 3 In the
on "Wireless" from the menu on the left. your new Wireless Name. Then click "Save"
Status
Status
Quick Setup
WPS
Working Mode
Network
Wireless
DHCP
USB Settings LAN
Forwarding
Security
Parental Control
Access Control
Advanced Routing
Wireless
Bandwidth Control
IP & MAC Binding
Dynamic DNS
System Tools

Physical Description

Before hardware connection, please write down the
Wireless Password and SSID found on the label of your
TL-WR710N. Both are case-sensitive.
Model:TL-WR710N(US) Ver:1.0
S/N:XXXXXXXXXXXX
MAC:B0487A663D6C
Wireless Password/PIN:12345678
SSID:TP-LINK_663D6C
IC: 8853A-WR710N
Model:TL-WR710N(US)
S/N:XXXXXXXXXXXX
MAC:B0487A663D6C
Wireless Password/PIN:12345678
SSID:TP-LINK_663D6C
TL-WR710N
Wireless Password/PIN : Default Password
SSID : Default Network Name
Access Point Mode
4
Create a wireless network from an Ethernet
connection. This mode is suitable for dorm rooms
or homes if there's already a wired router but you
need a wireless hotspot.
(Note: if the hotel's Internet has an authentication
process, you will need to authenticate it on EACH
device.)
Wired Ethernet
Connection
Click the Wireless Network icon on your desktop 4 Enter the
( or ). Select the Default SSID of the
Next.
TL-WR710N, then click Connect.
Not Connected
Connections are available
Wireless Network Connection
TP-LINK_ XXXXXX
Connect automatically
Connect
TP-LINK_Home
TP-LINK_Guest
TP-LINK_Neighbor
Free Public WiFi
Open Network and Sharing Center
"Wireless Network Name" box, type in 4 To customise your Wireless Password, click
"Wireless" from the menu on the left, then click
"Wireless
Wireless Settings
Wireless Network Name: INSERT CUSTOM SSID HERE (Also called the SSID)
Region: United States
Warning: Ensure you select a correct country to conform local law. Status
Incorrect settings may cause interference.
Quick Setup
Mode: 11bgn mixed
WPS
Channel Width: Auto
Working Mode
Auto
Channel:
Network
Enable Wireless Router Radio
Wireless
Enable SSID Broadcast
Enable WDS Bridging
- Wireless Settings
Save
- Wireless Security
- Wireless MAC Filtering
- Wireless Advanced
- Wireless Statistics
DHCP
USB Settings
Forwarding
Security
Parental Control
Access Control
Advanced Routing
Bandwidth Control
IP & MAC Binding
Dynamic DNS
System Tools
TL-WR710N LED Guide:
LED Status
Solid Blue The device is working properly.
System is booting.
Blinking
The Ethernet Cable or USB Device is
connecting to the product.
USB Reset LAN/WAN LAN
Ver:1.0
USB Connect a USB Flash drive or External Hard Drive for file
sharing. It can also be used as a charging station for mobile devices.
Reset
Resets the TL-WR710N to factory default settings.
LAN/WAN: Must use this port to connect to your Modem while in Router
mode. For all other modes, use it as an additional LAN port.
LAN: Connect your ethernet enabled devices for wired network access.
In client mode, use it to give wireless access to a wired-only device. In
access point mode, use it to receive network access from your local
network.
For more detailed information about Reset, please refer to
Appendix: Troubleshooting.
WISP Client Router Mode
5
Use as a client router to receive internet access
from a Wireless Internet Service Provider (WISP),
and share that access with local devices.
Default Password, then click OK or 5 Congratulations!
connected to your network!
Currently connected to:
TP-LINK_XXXXXX
Internet access
Wireless Network Connection
TP-LINK_XXXXXX
TP-LINK_Home
TP-LINK_Guest
TP-LINK_Neighbor
Free Public WiFi
Open Network and Sharing Center
5
In the "Wireless
"WPA/WPA2 - Personal
Security". in your new wireless Password. Then click "Save".
Wireless Settings
Disable Security
WPA/WPA2 - Personal (Recommended)
Wireless Set
Group Update Key Period:
Wireless Ne
WPA/WPA2 - Enterprise
Ch
Group Update Key Period:
WEP
def
You have successfully
Connected
Password" box under
(Recommended)" type
Version: WPA2-PSK
Encryption: AES
Wireless Password: INSERT CUSTOM PASSWORD HERE
(You can enter ASCII characters between 8 and 63 or Hexdecimal
Seconds (Keep it default if you are not sure, m
Version: Automatic
Encryption: Automatic
Radius Server IP:
Radius Port: 1812 (1-65535, 0 stands for default port 1812)
Radius Password:
(In seconds, minimum is 30, 0 means no upda
0
Type: Automatic
WEP Key Format: Hexadecimal
Key Selected: WEP Key Key Type
Key 1: Disabled
Key 2: Disabled
Key 3: Disabled
Key 4: Disabled
Save