Fiat 500 User Manual page 60

58 BLUE&ME™ User's Manual
To create a pairing relationship using manual interaction,
proceed as follows:
Press the /MAIN button to open the Main Menu, then
select SETTINGS by pressing the PRESET UP/OK but-
ton.
Select PAIRING and then press the PRESET UP/OK
button. The system will start the pairing procedure.
BLUE&ME™ will show the mobile phone pairing PIN
on the instrument panel display and announces it. Please
note that this is a PIN used just for this operation; it is not
your SIM PIN.
For the next two steps, consult your mobile phone
owner's manual about Bluetooth pairing.
On your mobile phone, query for Bluetooth wireless
technology enabled mobile phones that are within range
(this option on your mobile phone might be called
Discover, New Device, etc.). View the list of Bluetooth
wireless technology enabled mobile phones and select
BLUE&ME™ (item that identifies BLUE&ME™ on your
car).
When prompted by the mobile phone, enter the PIN
number shown on the instrument panel display. If pair-
ing is successful, the system will say "Connecting" and
then the display will show the paired mobile phone ID.
It is of vital importance to wait until this confirmation
message is displayed, since pressing the
button or the /ESC button will cancel the pairing
process. If pairing fails, an error message will be dis-
played and the pairing procedure needs to be repeated.
After pairing, the system will say "Welcome" immedi-
ately after connecting. This message will no longer be
heard the next time the phone connects to the system.
The system will ask if you would like to copy your paired
phone's phonebook. It is recommended to copy it. To
/MAIN