Service Information; Full Two-Year Home Use Warranty - Black & Decker DS321 Instruction Manual

Never apply excessive force when you use your belt sander. Too much force can result in
an overload and cause damage to the motor or the workpiece. If your belt sander becomes
too hot, operate it without load for 2 minutes. Always keep the air cooling vents clear. To
clean your belt sander, proceed as follows:
wARNING: To prevent accidental operation, turn off and unplug sander before
performing the following operations. Failure to do this could result in serious
personal injury.
• Use a clean dry paint brush to clear vents and ducts.
• Clean the housings using a clean damp cloth (do not use solvents, gas or turpentine.)
IMPORTANT: To assure product SAFETY and RELIABILITY, repairs, maintenance and
adjustment should be performed by authorized service centers or other qualified service
personnel, always using identical replacement parts.
Use only 3 in. x 21 in. (75 x 533mm) sanding belts. Recommended accessories for use
with your tool are available at extra cost from your local dealer or authorized service
center. If you need assistance in locating any accessory for your tool, please call
1-800-544-6986.
wARNING: The use of any accessory not recommended for use with this tool could be
hazardous.
All Black & Decker Service Centers are staffed with trained personnel to provide customers
with efficient and reliable power tool service. Whether you need technical advice, repair,
or genuine factory replacement parts, contact the Black & Decker location nearest you. To
find your local service location, refer to the yellow page directory under "Tools—Electric" or
call: 1-800-544-6986 or visit www.blackanddecker.com

fULL TwO-yEAR HOME USE wARRANTy

Black & Decker (U.S.) Inc. warrants this product for two years against any defects in
material or workmanship. The defective product will be replaced or repaired at no charge
in either of two ways.
The first, which will result in exchanges only, is to return the product to the retailer from
whom it was purchased (provided that the store is a participating retailer). Returns should
be made within the time period of the retailer's policy for exchanges (usually 30 to 90 days
after the sale). Proof of purchase may be required. Please check with the retailer for their
specific return policy regarding returns that are beyond the time set for exchanges.
The second option is to take or send the product (prepaid) to a Black & Decker owned
or authorized Service Center for repair or replacement at our option. Proof of purchase
may be required. Black & Decker owned and authorized Service Centers are listed under
"Tools-Electric" in the yellow pages of the phone directory and on our website www.
blackanddecker.com.
This warranty does not apply to accessories. This warranty gives you specific legal rights
and you may have other rights which vary from state to state. Should you have any
questions, contact the manager of your nearest Black & Decker Service Center. This
product is not intended for commercial use.
LATIN AMERICA: This warranty does not apply to products sold in Latin America. For
products sold in Latin America, check country specific warranty information contained in the
packaging, call the local company or see the website for warranty information.
fREE wARNING LABEL REPLACEMENT: If your warning labels become illegible or are
missing, call 1-800-544-6986 for a free replacement.
Black & Decker (U.S.) Inc.,
701 E. Joppa Rd.
Towson, MD 21286 U.S.A.
ACCESSORIES

SERvICE INfORMATION

9
See 'Tools-
Electric'
– yellow Pages –
for Service &
Sales