GE DDE5300G Use And Care Manual page 6

Controls Setting Guide for different fabrics and loads
Cottons & Linens
Permanent Press, Treated Cottons,
Blends with Cotton
Synthetics—Polyester, Nylon,
Acrylic Knits and Woven Fabrics
Sturdy
Delicate
Silks and Wools, Blends including
Silks and Wools
Rayon and Acetate
Down-filled garments, if machine
washing and drying are
recommended.
Baby Clothes—Sturdy: Diapers,
Nightgowns, Shirts, Pads, Sheets,
Receiving Blankets, Coveralls. Sce
Special Instructions.
Baby Clothes—Delicate
Blankets—Wool, Part Wool,
Cotton, Electric, Synthetic. See
below under "Extra-large Items:'
Curtains, Slipcovers, Draperies.
DO N~ MACHINE DRY
FIBERGLASS.
Chenille Bedspreads, Robes. See
below under "Extra-large Items:'
Rubber-coated Items, Laminated
Fabrics, Vinyl, Plastics and
Articles with Plastic Trim.
Extra-large Items—Queen or King
Size Sheets, Blankets or Spreads,
Sleeping Bags, Insulated Jackets or
Suits, Mattress Covers (Pads),
Quilted Bedspreads.
Pillows—Feather and Polyester-
filled (if manufacturer recommends
they be dried in a dryer). See
Special Instructions.
*The terms High, Medium and Low Heat are those usually found on fabric care labels. For best results, follow your fabric care labels.
by setting the Cycle Selector to either side of the recommended settings.
Drying
Selection* Cycle
Normal Regular
Normal
Perm Press& Knits
Perm Press& Knits
Normal
Low/Knits
Low/Knits
Perm Press& Knits
Low/Knits
Normal Regular
Normal Regular
Low/Knits
Perm Press& Knits
Normal Regular
Normal Regular
Normal Regular
No Heat Regular
Normal
Regular
Low/Knits
Regular
Normal Regular
Cycle Setting
HEAVY to MEDIUM setting for average loads
EXTRA HEAVY setting for work clothes and
thick, knitted cottons.
Set at MORE DRY to LESS DRY depending
on load size and degree of dryness desired. To
de-wrinkle garments that have not been washed,
use DE-WRINKLE setting.
Set at MORE DRY for sturdy fabrics,
LESS DRY for delicates.
Set toward LESS DRY
Set toward LESS DRY.
HEAVY to MEDIUM setting.
MEDIUM to HEAVY setting, depending on load size
and degree of dryness desired.
Set toward LESS DRY.
Set at LIGHT setting 20 to 25 minutes.
For first setting, set at LIGHT setting 20 minutes;
for second setting, set at 15 minutes.
First setting—LIGHT setting 20 minutes;
additional settings—5 minutes.
Set for time desired
First setting—LIGHT setting 20 minutes;
additional settings—5 minutes.
First setting—LIGHT setting 20 minutes;
second setting—15 minutes;
additional settings—5 minutes.
EXTRA HEAVY setting 105 minutes.