Using Your Refrigerator; Temperature Control And Adjustment - Beko CDA 565 FS Manual

5

Using your refrigerator

TEMPERATURE CONTROL
AND ADJUSTMENT
Operating temperatures are controlled
by the setting knob (see diagram)
located on the ceiling of fridge
compartment. Settings may be made
from min, 1 ... 6, max, max being the
coldest position.
When the appliance is switched on
for the first time, the setting knob
should be adjusted so that after 24
hours, the average fridge temperature
is no higher than +5°C (+41°F). We
recommend you set the knob half
way between the min and max setting
and monitor to obtain the desired
temperature i. e. towards max you will
obtain a colder fridge temperature and
vice versa. Some sections of the fridge
may be cooler or warmer ( such as the
salad crisper and the top part of the
cabinet ) which is quite normal.
The normal storage temperature of the
freezer should be -18°C (0°F). Lower
temperatures may be obtained by
adjusting setting knob towards max
position.
We recommend that you check
the temperature with an accurate
thermometer to
ensure that the storage compartments
are kept to the desired temperature.
Remember you must take your reading
very quickly since the thermometer
temperature will rise very rapidly after
you remove it from the freezer.
Please remember each time the door
is opened cold air escapes and the
internal
temperature rises. Therefore never
leave the door open and ensure it is
closed
immediately after food is put in or
removed.
14
EN