Cutting Mat; Cutting Blade Replacement - Rexel SmartCut A515pro Instruction Manual

Cutting mat

Cutting mat has four cutting positions (2 each side). When
blade does not cut cleanly, either rotate the mat or flip
over to new cutting surface E. When mat has been used
completely on all four positions, replace it.
Accessories
Cutting Mats: A515pro - 2 Cutting mats, Part number: 2101990
A525pro - 2 Cutting mats, Part number: 2101991
A535pro - 2 Cutting mats, Part number: 2101992
Blades: 1 Multiblade disk, Part number: 2101989 (A515pro/A525pro/A535pro)
Refer to your local reseller for availability.
Service
Do not attempt to service or repair the unit yourself. If your
trimmer is under warranty return it to the point of purchase
for replacement or repair. If your trimmer is no longer
under the point of purchase return period and requires
replacement or repair, please contact your supplier for
further assistance.
Guarantee
Operation of this machine is guaranteed for two years
from date of purchase, subject to normal use. Within the
guarantee period, Rexel will at its own discretion either
repair or replace the defective machine free of charge.
Defects due to misuse or use for inappropriate purposes are
not covered under the guarantee. Proof of date of purchase
Register this product online at www.rexeleurope.com

Cutting blade replacement

CAUTION: Sharp blade
m
F. To remove the rotary blade housing cap (2), loosen
1
and remove the screws (1) on right hand side.
Remove the rotary blade assembly (3); remove center
2
screw (4) and separate multiblade from housing (5).
Replace multiblade (5) with new multiblade.
Re-assemble in reverse order.
3
will be required. Repairs or alterations made by persons not
authorised by Rexel will invalidate the guarantee. It is our
aim to ensure that our products perform to the specifications
stated. This guarantee does not affect the legal rights
which consumers have under applicable national legislation
governing the sale of goods.
G
5