Do you have a question about the Home Theater and is the answer not in the manual?
Questions and answers
Summary of Contents for AV123 Home Theater
Page 1
Your Rocket Tyke Home Theater Enjoyment Guide Yours exclusively through 2150 W. 6th Ave. • Suite L • Broomfield, CO 80020 • Toll Free 1-877-543-7500 • e-mail: info@av123.com...
Page 2
That’s why AV123 will continue to work hard to earn your respect with technical advice and customer service that is second to none in our in- dustry.
Your Rocket Tyke Home Theater Enjoyment Guide Table of Contents Product and Company Introduction Section 1-Getting Started Section 2-Placement 2.1 Front Speaker Placement 2.2 Should You “Toe In” Your Speakers 2.3 Center Channel Speaker Placement 2.4 Surround Speaker Placement 2.5 Alternative Speaker Placement Options •...
• Source Interconnects – A digital coaxial a safer way or place to buy today. At AV123, or fiber optic cable and possibly standard misleading and high-pressure sales tactics have analog RCA cables depending on your no place.
starting guide. This suggests that the best place- Side walls have a major impact on the sound you ment for your Left speaker is approximately 1/3 of hear. Ideally, you should not place your main the way along the wall behind your speakers. speakers close to them.
2.6 Your Tyke SW-8 Subwoofer Placement Unlike most all-in-one home theater systems, 2.4 Surround Speaker Placement your Tyke 5.1 system includes a true 50W pow- ered 8” subwoofer. Because subwoofers play a...
The low frequency sound waves emitted by the 3.1 Connecting Your Speakers SW-8 are quite long and will therefore interact greatly with the walls of your room. Consequen- All Rocket Tyke speakers feature a single pair of tially even small placement adjustments can spring loaded binding posts.
5. At the speaker end of the same wire, con- A Question of Polarity nect the "+" conductor to the "+" terminal on the speaker. If you're like most of us, you'll simply run 6. Similarly, connect the "-" conductor to the speaker wire from the appropriate output of your "-"...
Thus, for example, if set to 100 Hz your subwoofer will play ONLY 100 Hz information and below, regardless of what it is receiving. If used with a home theater processor or receiver, we recommend by- passing the SW-8s crossover (set to its maximum 150 Hz value) and using the elec- tronic crossover built into your components.
Page 10
Tyke SW-8 Amplifier Panel Let's start by setting the level of your sub to are calibrated to the reference point using your match the rest of your speakers. test tones, then direct the tone to the sub- woofer. Adjust its level using the gain control From the receiver’s speaker calibration menu, set on the subwoofer itself until it reaches the SPL the subwoofer level to 0 dB.
The easiest way to test different methods and That's what your Rocket Tyke Series speakers frequencies for crossing over your subwoofer is were designed for. And why AV123 takes such by using bass sweeps from the "AVIA Guide To pride in bringing them to you! Home Theater"...
7.1 AV123 Warranty Policy and Registration and Neodymium motor structure with unique, precision designed progressive suspension sys- All products sold through AV123 carry a limited tems for low distortion and high output manufacturer's parts and labor warranty. All 3/4” silk dome Neodymium motor tweeter with...
Need help?
Do you have a question about the Home Theater and is the answer not in the manual?
Questions and answers