Summary of Contents for Onix Rocket UFW-12
- Page 1 Rocket UFW-12 Subwoofer Enjoyment Guide Yours exclusively through 2150 W. 6th Ave. • Suite L • Broomfield, CO 80020 • Toll Free 1-877-543-7500 • e-mail: info@av123.com...
- Page 2 That’s why AV123 will continue to work hard to earn your respect with technical advice and customer service that is second to none in our in- dustry.
-
Page 3: Table Of Contents
Brass Discs c. Rubber Feet Section 2—Subwoofer Placement and Location • 2.1 Subwoofer Placement • 2.2 Subwoofer Location Section 3—Connecting Your UFW-12 Subwoofer Section 4—Setting Up Your Surround Processor or Receiver • 4.1 Small or Large? • 4.2 Simple Calibration •... -
Page 4: Section 1-Product Overview
In addition to the please unplug it from the wall. expert advice available on our website, or C. Line Fuse – The UFW-12 is equipped with through our trained advisors, there is simply not a 10-amp fast blow fuse (120V). Always a safer way to buy. -
Page 5: Brass Feet, Discs, And Rubber Feet
Spike Feet also included metal discs to provide a contact point between your speaker spikes and the Included with your Rocket UFW-12 subwoofer floor. To use, simply place the disc under the are the same high quality spike such that the small indentation is aligned... -
Page 6: Section 2-Subwoofer Placement And Location
The driver can be facing you or be pointed along either wall. The low frequency sound waves emitted by the UFW-12 are quite long and will therefore interact greatly with the walls of your room. As a result, even small placement adjustments can have a significant impact on the sound you hear. -
Page 7: Section 4-Setting Up Your Surround Processor Or Receiver
L and R inputs on Your speaker system amplifier will be less taxed the UFW-12’s back panel from a low-level output as well, since much of the stress of producing on your preamplifier or receiver. Often “Tape” or deep bass will be eliminated. -
Page 8: Crossover Settings
(in the re- tings. The THX standard, and the recommended ceiver’s control panel) by a few dB above the crossover with your UFW-12 is 80Hz for home main channel level. This can be very effective at theater. -
Page 9: Performing A Room Frequency Sweep
“frequency sweep” of your room. This of this manual). will give you a graphical representation of how the UFW-12 is performing in your unique listen- 5.2 Interpreting the Results ing environment. Once you’ve completed this exercise, you will 5.1 Performing a Room Frequency Sweep... -
Page 10: Advanced Parametric Eq Adjustments
B) Bandwidth—The bandwidth control on your our center (instead of 20Hz). Because we must UFW-12 allows you to set the WIDTH of the filter be equidistant from this center frequency, our you want applied. This control is based on a per- range thus becomes 25Hz to 85Hz—much closer... - Page 11 This can be done with the following equation: Thus, in this example, a 5dB cut applied to our curve will sufficiently “tame” this peak and flat- [(Bandwidth)x(Center Hz)] + (Center Hz) ten the response of the UFW-12 in your room. New Center (55Hz) Actual Curve Width...
-
Page 12: Section 6-Proper Care And Feeding
Call USA toll-free 877.543.7500 or worldwide at 303.543.7500. Whether you need technical assistance, have a suggestion to make your UFW-12 even better, or simply want to let us know how much you enjoy your new subwoofer, please feel free to contact...