Agilent Technologies EasyEXPERT Manual page 406

14 SPGU_PLSDIV
LogLevel: Disable (0) or Enable (>=1)
LogFile: Absolute path name of the log file
LoopMax: Maximum loop count of measurement adjustment
LimitAbs: Limit when target voltage = 0 of measurement adjustment
LimitRate: Limit when target voltage != 0 of measurement adjustment
Damper: Damper coefficient of measurement adjustment
VgBaseOption: Select the gate base voltage will be VgBase or VgPeak (*2)
VdBaseOption: Select the drain base voltage will be VdBase or VdPeak (*2)
(*2) If you select 'VxPeak' for VxBaseOption, the pulse base voltage is same as Peak, and the output waveform
will be kind of pseudo-DC bias.
14-6
Agilent EasyEXPERT Application Library Reference, Edition 8