Page 1
Your Rocket ELT-1 Home Theater Enjoyment Guide Yours exclusively through 2150 W. 6th Ave. • Suite L • Broomfield, CO 80020 • Toll Free 1-877-543-7500 • e-mail: info@av123.com...
Page 2
That’s why AV123 will continue to work hard to earn your respect with technical advice and customer service that is second to none in our in- dustry.
6.1 Speaker Grilles…On or Off? 6.2 Some Advice on Speaker Wire 6.3 Speaker Break In 6.4 Speaker Care 6.5 Stay in Touch Section 7-Specifications and Your ELT-1 Warranty 7.1 AV123 Warranty Policy and Registration 7.2 Specifications • ELT LRS Satellite •...
Source Interconnects – A digital coaxial or through our trained advisors, there is simply not fiber optic cable and possibly standard a safer way or place to buy today. At AV123, analog RCA cables depending on your misleading and high-pressure sales tactics have equipment (if DVD-A or SACD is going to no place.
Use the "Rule of Thirds" whenever possible as a Side walls have a major impact on the sound you starting guide. This suggests that the best place- hear. Ideally, you should not place your main ment for your Left speaker is approximately 1/3 of speakers close to them.
useful as you scout out possible locations. screen as possible. Try to keep the tweeters of all three speakers (Left, Center, and Right) 1. Shelf mounting: Logically, this may be your as close to the same height from the floor as first consideration.
Although the advice in this section will certainly Unlike most all-in-one home theater systems, help you enjoy the best possible sound from your ELT-1 includes a true 200W powered 10” your Rocket ELT Series speakers, you might subwoofer for wall-rattling bass. Because sub-...
Section 3-Making the Connections For pin and spade lug connections, follow the same general guidelines. If you're attaching pins Now that you've got your speaker placed prop- or spade lugs to your speaker cables, read the erly, it's time to connect them. Before you begin instructions supplied with the termination you've connecting your speakers, turn your system chosen.
per are the most common. If you can't see Don’t Over Tighten! the conductors themselves, look closely at the insulation. You'll notice that the insu- Be careful when tightening the connector's end lation over one conductor is different than caps. Although logic may seem to indicate that that over the other conductor - one will compressing the wire as much as possible will have slight molded ridges in it, the other...
4.2 SW-10 Setup Your ELT SW-10 Subwoofer Though relatively “plug and play” the following Your ELT-1 system includes an incredible 10” information will help you configure your ELT SW- front ported 200W subwoofer for thundering bass 10 properly in your new home theater environ- response.
known as a cheater plug is included with the Frequency SW-10. Try plugging in your subwoofer with- out this adapter first. If your subwoofer As shown in the figure above (please see buzzes or hums while NOT receiving a signal, item # 5) your SW-10 subwoofer includes a then try the cheater plug.
ELT-1 sor/receiver. If you find the need to go much speaker connections, and should be followed for above +2 or +3 consistently, we recommend ad- best performance.
You'll find several types of Onix touch with us. We like hearing from our custom- speaker cable on the AV123 web site. We'll be ers. For the latest information on the entire glad to advise you on the best match for your Rocket line or to register your new speakers, system.
7.1 AV123 Warranty Policy and Registration Drivers: custom 5.25" long-throw alumi- num cone woofers, custom 2.5” paper com- All products sold through AV123 carry a limited posite midrange, hybrid silk-suspended alloy manufacturer's parts and labor warranty. All dome tweeter.
Need help?
Do you have a question about the ELT-1 and is the answer not in the manual?
Questions and answers