Table of Contents
Advertisement
PL-200C
2
Connection
Note: Amplifier should be switched off and disconnected from power while you are
connecting speakers to amplifier. Turn your amplifier on only after you check and make
sure speakers are properly connected.
Connections are made at the terminals located on the back of the loudspeaker system. The
terminals accept spade plugs, bare wire or banana plugs.
Locate the Front Speaker, Center Speaker and Rear Speaker terminals on your AV amplifier.
For each channel, the RED terminal and the BLACK terminal on the speaker must be
connected to the corresponding RED (+) and BLACK (-) loudspeaker connections on the
amplifier. Make sure you follow this + to + and - to - connecting method so the speakers are
working in phase for best bass response and imaging.
Please use highest quality speaker cables with shortest distance from speaker to amplifier to
ensure least resistance and signal lost.
Turn amplifier power on only after you check to make sure all connections are made
correctly.
Subwoofer Instructions
The PL speakers must be used in combination with a subwoofer to have bass performance
and provide full impact from motion pictures. For best integration and smooth transition,
use SD-10 subwoofer for your system. For operating instructions on the SD-10, please refer
to its separate manual.
1-4
Advertisement
Table of Contents
