1000 feet over CAT5 wire to a HDRXSG01 receiver (sold separately). The HDTXSG01 installs easily in a single-gang J-box. It contains a RJ45 output for the HD video and digital audio signal as well as a standard IR (requires separate wire run) and power connection either through the front or back of the unit.
Page 2
[5] Installation Complete! No adjustments needed! IR INSTALLATION: An IR control system can be established by purchasing one of Xantech’s IR kits. Xantech’s IR kits contain power supplies, emitters, connecting blocks, and IR receivers which allows IR control of the monitor and source equipment via an IR remote control.
The HDTXSG01 is supplied with a 8VAC, 400mA power supply. Do not use any power supply other than the one included with the HDTXSG01. The HDTXSG01 can be powered from either the front on the unit (DIN connection) or the rear of the unit (Screw Terminal connection). DO NOT USE FRONT AND REAR POWER SUPPLY CONNECTIONS AT THE SAME TIME.