Advertisement
Quick Links
INSTALLATION AND OPERATION MANUAL
8000.06T – Plastic Thru-Hull Transducer with Integrated Temperature Sensor
To ensure safety and many years of trouble-free operation of your product,
please read this manual carefully before using this product.
SAFETY INFORMATION:
•
Periodically wipe the face with a dry cloth. Do not use abrasives or solvents
on this device.
•
Only qualified personnel should perform repairs or servicing not covered in
this manual.
•
The LCD used in the product is made of glass. Therefore, it can break
when the product is dropped or impacted.
•
Keep this product away from heat sources such as radiators, heaters,
stoves and other heat generating sources.
temperatures above 150° F (65° C).
•
Shade the LCD during storage. Do not expose LCD to direct sunlight for
extended periods of time.
storage.
NOTES, NOTICES, AND CAUTIONS
WARNING: Indicates a potential for property damage, personal injury or
death.
IMPORTANT: Indicates potential damage to the device and tells you how to
avoid it.
NOTICE: Indicates important information that helps you make better use of
the device and tells you how to correct a performance problem.
INFORMATION: Indicates resources to obtain the proper information to help
you make the most of your device.
Read this manual completely before attempting to use or
install your device. Visit our Customer Service Center on our
website for advanced troubleshooting and technical support.
This depth sounder should not be used as a navigational aid
to prevent grounding, boat damage, or personal injury. Always
operate the boat at slow speeds in unfamiliar water, or if you
suspect shallow water or submerged objects.
w w w . h a w k e y e e l e c t r o n i c s . c o m
8000.06 - Plastic Thru-Hull Transducer
Use the supplied cover at all times during
I
NFORMATION
W
ARNING
Do not store in extreme
:
:
Advertisement
Related Manuals for Norcross 8000.06T
Summary of Contents for Norcross 8000.06T
- Page 1 INSTALLATION AND OPERATION MANUAL 8000.06T – Plastic Thru-Hull Transducer with Integrated Temperature Sensor 8000.06 - Plastic Thru-Hull Transducer To ensure safety and many years of trouble-free operation of your product, please read this manual carefully before using this product. SAFETY INFORMATION: •...
- Page 2 PARTS SUPPLIED IN PACKAGING The following parts should be included with the transducer: • Thru-Hull Transducer with Integrated Temperature Sensor, 30 ft Cable and Connectors • Rubber Gasket • Plastic Nut • Integrated Temperature Sensor If any items are missing or damaged, please contact our customer service department.
-
Page 3: Mounting The Transducer
MOUNTING THE TRANSDUCER OTICE The included transducer needs to be installed in a thru- hull configuration. It CANNOT be glued in-hull. We also offer the option to trade-in the included transducer for a customized transducer. Please visit our website for details. Does the Installation Vessel Have These Characteristics? •... - Page 4 STEP 1 Test Before Installation 1. Connect the sensor to the instrument as per the instructions supplied with the instrument. 2. Place the sensor in the water with the transducer face in the horizontal position and aimed towards the sea bottom. 3.
- Page 5 STEP 2 Choosing a Mounting Location To obtain the best performance, the transducer should be mounted in a location where the water flow beneath the hull is aeration and turbulence-free. Try to mount the transducer as close to the centerline of the boat as possible.
- Page 6 Mounting Location “DONT’s” OTICE deliver consistent, accurate readings, the transducer must have a continuous supply of non-turbulent water. O NOT MOUNT THE TRANSDUCER IN AN AREA OF TURBULENCE OR BUBBLES Never install the transducer where the boat may be supported during trailering, launching, hauling, or storage. OTICE To Get a Good “View”...
- Page 7 STEP 3 Drilling the Hole 1. After selecting the mounting location based on STEP 2, place the rubber gasket inside the hull against the mounting location. (illustration A) 2. Ensure that there is at least 1/2” (12 mm) of flat surface area around the rubber gasket.
- Page 8 STEP 5 Cable Routing & Connection to the Depth Sounder Display Route the cable to the mounting location of the depth sounder transducer plug. • To reduce electrical interference, separate the transducer cable from other electrical wiring. • Coil any excess cable and secure it in place using tie-wraps. •...
- Page 9 CARE AND D MAINTENANC Aquatic grow wth can accumul late rapidly on th he transducer’s s surface. This w will greatly reduc ce its performan ce. If you notice e a degradation in performance your depth so ounder, you may need to clean th e transducer.
- Page 10 (F) 407-370-6880, (E) customerservice@norcrossmarine.com (I) www.norcrossmarine.com ARNING © 2008 NorCross Marine Products Inc., All Rights Reserved. ALL unauthorized copying of the content of this document without the expressed written consent of NorCross Marine Products, Inc is strictly forbidden. w w w . h a w k e y e e l e c t r o n i c s . c o m...
Need help?
Do you have a question about the 8000.06T and is the answer not in the manual?
Questions and answers