Function - Kogan KGNFHDLED32VA User Manual

Menu system instruction

Function

Aspect Ratio
You can select the picture size which best corresponds
to your viewing requirement.
p q
key to select "
1. Press /
t u
2. Press / key to set the scale mode.
You can also press "
to select one of the scale modes.
(Auto, 16:9,4:3,Panorama,Moive,Subtitle. Auto,
Panorama is disabled when it is in
/USB mode. )
Screen Saver
This option is only used in ATV mode.
p q key to select "Screen Save" option.
1.Press /
t u
2.Press / to choose on or off.
OPC
t u button to select "On", "Off" and "Demo". In "On" mode, according to bright dark
Press /
screen image changes, the system will automatically adjust the allocation of power,so as
to achieve the effect of energy-saving.
function In "Demo" mode,TV will show the OPC effect of real-time in the lower right
.
corner of the screen, there will be DLC,DCC and PW.The Demo mode is not available in
PC,USB and DVI-HDMI modes or on signal.
Note: 1.The Demo mode can not show together with other meanus.
If "OPC" is in "Demo" mode, it will turn to "On" automatically the next time you
2..
turn on the TV.
Motion
After selecting the "Motion" option, press OK or
1. E-Motion: Press
will be more liquid in "On" mode. Your eyes can also be protected. In "Demo" mode,
the panel will be divided into two parts to show this function. The right part open the
function, and the left part does not. This option is not used in DVI/ VGA/ USB mode.
2. Detail enhance: Press
will be stronger when it is in "On" mode.
3. Noise Reduction: Press
HIGH/DEFAULT/Off. You can select the right mode to match the pictures.
Aspect Ratio
" key on the remode control
Aspect
Component/HDMI/PC
t u
/ key to select the E-Motion mode: On/Demo. The moving pictures
t u
/ key to select the detail enhance mode: Off/On. The detail
t u
/ key to select the Noise Reduction mode: LOW/MIDDLE/
" option.
''Off'' is the default setting and disables the OPC
u
key to enter the submenu.
36
Aspect Ratio
16:9
Screen Saver Off
OPC Off
Motion
Select Menu:Return