Selecting A Supported Display Mode - Lenovo LT1953 User Manual

Selecting a supported display mode

The display mode the monitor uses is controlled by the computer. Therefore, refer to
your computer documentation for details on how to change display modes.
The image size, position and shape might change when the display mode changes.
This is normal and the image can be readjusted using automatic image setup and the
image controls.
Unlike CRT monitors, which require a high refresh rate to minimize flicker, LCD or
Flat Panel technology is inherently flicker-free.
Note: If your system has previously been used with a CRT monitor and is currently
configured to a display mode outside the range of this monitor, you may need to
reattach the CRT monitor temporarily until you have re-configured the system;
preferably to 1440 x 900 at 60 Hz, which is the Native Resolution Display mode.
The display modes shown below have been optimized at the factory.
Table 2-3. Factory set display modes
Timing
PAL
640x350
640x480
720x400
800x600
832x624
1024x768
1152x864
1280x768
1280x1024
1366x768
1440x900
Refresh rate(Hz)
50Hz
70Hz
60,72,75Hz
70 Hz
60,72,75Hz
75Hz
60,70,75Hz
75Hz
60Hz
60,70,75Hz
60Hz
60,75Hz
2-7
Chapter 2.