Iomega Jaz drive 1 GB Installation Manual

SCSI SCSI SCSI
SCSI SCSI
®
drive

Installation Guide

1
Check your SCSI
(Small Computer System Interface)
connection.
Your computer MUST have an internal SCSI adapter or
connection for the Jaz drive.
• If you plan to use an Iomega SCSI adapter, install it NOW
using the installation guide shipped with the adapter; then
return to step 2 below. If you need to purchase an adapter,
call your Iomega dealer or 1-800-MY-STUFF.
• If you plan to use a non-Iomega SCSI adapter, refer to
"Non-Iomega SCSI Adapters" in the Jaz User's Guide.
Windows NT Users You may need to install driver software for
your SCSI adapter. Refer to NTReadme.txt on the Windows NT Install
diskette for additional information.
2
Unpack the Jaz drive and accessories.
CAUTION Before handling the Jaz drive, touch a grounded metal
object (like an unpainted metal screw on your computer) to
discharge any buildup of personal static electricity.
Manuals and Install Diskettes
Jaz Drive
Jaz "tools" Disk
(contains Jaz Tools software)
3.5" Universal Installation Kit
(includes mounting screws)
Data Cable
3
Turn OFF the computer power switch, and
DISCONNECT the computer power cord.
WARNING Always disconnect computer electrical power before
beginning a computer hardware change.
paper recycled on Printed
the are names brand and product other All Corporation.
graphic the and of, trademarks registered are Jaz and
numbers.
a for package software Jaz your with included
only). Canada & (U.S. time Mountain
Monday call your take to ready are
defect.
found is issue your if reversed be will charge
cost support the put to 1-900-988-4747
American MasterCard, (VISA, card credit
toll-free, 1-888-4-IOMEGA, call can You
of rate the at charged are issues Other product.
determines Iomega issues for charge of free
number.) this at available
1-801-779-6100 ...........................................
only) Download - hrs (24
1-801-778-5888 .........................................................
E-Mail) your sending when header
support@iomega.com ................................................................
1-801-778-5763 ..................... only)
Iomega GoWord: ...............................................................
Iomega Keyword: ................................................................
http://www.iomega.com ............................................................
4
Remove the cover from your computer.
your computer manual if removal is unclear.)
Disconnect
power
5
Locate a vacant 3 1 / -inch or 5
2
notes in illustration for the next step.
1
3 / -inch Bays
2
(after selecting bay,
go to step 6)
5
a 5 1 / -inch drive bays ONLY:
4
Use the 3.5" Universal Installation Kit to assemble a 5.25"
mounting bracket and attach it to the drive, then go to step 6.
Instructions for assembling the mounting
bracket are printed on the box.
EN143604
companies. respective their of property
Iomega of, trademarks are eye and hand, swirl,
logo Iomega the Iomega, Corporation. Iomega 1997 ©
support European of list complete
manual electronic the to Refer
Numbers Support European
p.m. 6 to a.m. 6 from Friday through
associates support technical Iomega's
product a to due be to Iomega by
the way, Either bill. phone your on
call can you or Discover), or Express,
your to cost support the charge to
products. Jaz for incident per $19.99
Iomega an in defect a to relate
is Support Technical One-on-One
Support Technical Iomega One-on-One
is information support technical (No
Information Return and Repair
ANSI above; and baud 9600 8,N,1;
Board Bulletin Iomega
subject the in "Jaz" type (Please
E-Mail Automated
Canada & (U.S. Help FAX Automated
Network Microsoft
Online™ America
Page: Home Internet
Systems Help Automated Iomega's
(Refer to
1 / -inch drive bay. See
4
1
5 / -inch Bay
4
(after selecting bay,
go to step 5a)