Edit An Ice Contact; Emergency Message; Ice Information - Kyocera Kona User Manual

2. Read the message and press OK (left softkey).

Edit an ICE Contact

You can change or remove an ICE contact.
1. From standby mode, press CONTACTS (right softkey) and highlight an entry.
2. Press OPTIONS (right softkey) > Settings > ICE > ICE Contacts.
3. Highlight an entry and press OPTIONS (right softkey).
4. Select Replace to select another contact. Select a new contact from the displayed list.
– or –
Select Remove > YES (left softkey) to remove the selected contact.

Emergency Message

You can send an emergency message to the Text contacts registered in ICE Contacts.
To send an emergency message:
1. From standby mode, press CONTACTS (right softkey) and highlight an entry.
2. Press OPTIONS (right softkey) > Settings > ICE > SEND TEXT (right softkey).
3. Read the message and press OK (left softkey).
Note: When Location settings is turned off, it will be automatically turned on.
To enter or edit the emergency message:
1. From standby mode, press CONTACTS (right softkey) and highlight an entry.
2. Press OPTIONS (right softkey) > Settings > ICE > Emergency Message > EDIT (right
softkey).
3. Enter or edit the message and press DONE (left softkey).

ICE Information

You can register your own information,medical information, etc.
1. From standby mode, press CONTACTS (right softkey) and highlight an entry.
2. Press OPTIONS (right softkey) > Settings > ICE > My Information > EDIT (right
softkey).
3. Enter or edit the necessary information and press DONE (left softkey).
Contacts 57