Humidifier Operations; Assembly - Sears Kenmore 758.144523 Owner's Manual

Humidifier Operations
Your new Sears humidifier is designed to
satisfy home humidity requirements
through the principle of evaporation of
water into the air.
After water is added to the tank, the filters
begin to soak up the water and become
totally saturated in approximately 30 min-
utes. Air is drawn in from the rear of the
humidifier, then passes through the filters
by means of two circulation fans. As air
passes through the filters, moisture is
absorbed into the air and then released
through the top of the humidifier. This
moist air is released in the form of vapor.
No water droplets will enter the home. All
evaporation into the air takes place in the
humidifier; which means that the residue
left by evaporating water is not passed
into the home, but remains inthe filter.
CAUTION: Use only 42-14900 EPA
Registered Bacteriostat available
from SEARS Retail store. Under no
circumstances should you use water
treatment products designed for
Roto belt or Ultrasonic humidifiers.
Humidified Air is
Then Released
Through the Top
*.':;;:-;',;;;;
Dry Air Enters _:!I!_C_
Through the
Rear Y
.... ,_# ,_#J
CAUTION: Keep your humidifier
clean. While humidifiers do not
cause colds, some studies suggest
that dirty humidifiers can cause cold-
like symptoms in some people. To
reduce the risk of this, we recom-
mend you clean your humidifier
weekly with Humidifier Cleaner 42-
14713 and use Bacteriostat 42-14900.
These are available at your local
Sears store.
Assembly
Your new Sears Kenmore humidifier is
completely assembled for you to use.
Remove the packaging material from
inside your humidifier and follow the
instructions of this owner's manual for
proper usage. The packaging material is
located under the fan assembly. Remove
the packaging material and discard.
4