Table of Contents
Advertisement
This camera must be used with specified AC power adapter. Damage
caused by the use of an incorrect adapter is not covered under the
warranty.
When the charging is not started even if following the above procedure,
turn the power on at any mode after LCD indication appears, and then
turn the power off.
The battery may feel warm after it has been charged or immediately after
being used. This is normal and not a malfunction.
When using the camera in cold areas, keep the camera and battery warm
by holding them inside your outer cloth.
If you open the battery cover without removing the battery, the power will
not be terminated. If you remove the battery, you have to insert the battery
again in a period of 2 hours in order to make sure that the date and time
will not be reset.
22-E
Advertisement
Table of Contents
