Table of Contents
Advertisement
Viewing the Power Capacity
Charging
When TekCharge is being charged, the capacity indicator lamp will light to indicate the amount
of power in the battery:
Orange: 0% - 80% capacity
Green:
80% - 100% capacity
Discharging
When TekCharge is connected to and charging a device, or when the power switch is ON and
TekCharge is not connected to a device, the capacity indicator lamp will be constantly lit to
indicate the amount of power remaining in the battery:
Green:
20% - 100% capacity
Orange: 0% - 20% capacity
Charging a Device Using an Adapter
1 . Select the adapter that fits securely into the power jack on your portable device and plug it
into the input/output cord .
2 . Insert the USB plug on the input/output cord into the USB port on the end of TekCharge .
3 . Connect the adapter plug into the power jack on your portable device .
4 . Slide the TekCharge power switch to ON to provide power through the USB port .
5 . Turn on the portable device and use it as you would normally . While connected, TekCharge
will power and/or charge your device .
Or
Leave the portable device turned off and TekCharge will charge the device battery .
6 When finished, slide the power switch to OFF and unplug the power output cord from
TekCharge and your device .
NOTE: If none of the included adapters fits snugly into your portable device power jack, please
go to our web site at www.tekkeon.com/MP1820adapters to determine which adapter plug
you need for your device. You can obtain most adapters through the web site, or by contacting
Tekkeon by phone at 888-787-5888 or 949-788-9228. If available through Tekkeon, the adapter
will be sent to you for a nominal fee.
6
Advertisement
Table of Contents
