Technical Parameters - Pyle PSCHD60BK Manual

 Remember to put the Mode Switch in your desired recording position before inserting the camera in the
waterproof case. There is no external button for the Mode Switch.
 After every use in salt water you will need to rinse the outside of the housing with non-salt water and dry.
Not doing this can eventually cause corrosion of the hinge pin and salt buildup in the seal, which can cause
failure.
 To clean the seal, rinse in fresh water and shake dry (drying with a cloth may cause lint to compromise the
seal). Re-install the seal into the grooves in the backdoor of the housing.

Technical parameters

Image sensor
Function mode
Camera lens
Digital zooming
Shutter
LCD display screen
Image resolution
Video resolution
White balance
Exposure
5M pixels (CMOS)
Video recording, photo, removable disk
F3.1 f=2.9mm
4X
Electronic shutter
2.4-inch touch screen
12M (4000 × 3000), 10M (3648x2736), 8 M (3264x2448), 5M (2560×1920)
VGA: 640x480 (120 frames / sec), HD: 1280x720 (60 frames/sec.) FHD:
1920x1080 (30 frames/sec.)
Automatic
Automatic
22