1. Manuals
  2. Brands
  3. NComputing Manuals
  4. Network Hardware
  5. OfficeStation L110
  6. User manual

NComputing OfficeStation L110 User Manual

Ncomputing co., ltd. user s guide fast ethernet version one pc + officestation solution l110
Hide thumbs Also See for OfficeStation L110:
Table of Contents

Advertisement

Quick Links

One PC + OfficeStation solution
= 10 happy users.
OfficeStation (L110) User' s Guide
Fast Ethernet Version

Advertisement

Table of Contents
loading

Related Manuals for NComputing OfficeStation L110

Summary of Contents for NComputing OfficeStation L110

  • Page 1 One PC + OfficeStation solution = 10 happy users. OfficeStation (L110) User’ s Guide Fast Ethernet Version...

  • Page 2: Safety Instructions

    Safety Instructions The following instructions pertain to the risk of fire, electric shock or bodily injury. Please read all of these instructions carefully. 1. Save these instructions for later use. 2. Follow all of the instructions and warnings marked on this product or included in this manual. 3.

  • Page 3: Maintenance

    Maintenance If the product does not operate normally, adjust only those controls that are covered in the operating instructions. Improper adjustment of other controls may result in damage and may require extensive repair. Unplug this product from the main power outlet and call for service under any of the following conditions : ●...

  • Page 4: Before You Read

    Before You Read Trademarks NComputing, NComputing Co., Ltd. the NComputing logo, and other NComputing trademarks are the property of NComputing Co., Ltd. and may be registered in the United States and/or other countries. OfficeStation, EXPANION, WoIP and UTMA are trademarks or registered trademarks of NComputing Co., Ltd. in the United States and/or other countries. Microsoft, Windows, and the Microsoft logo are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries.
  • Page 5 Notice How to register your S/W Serial Number(s) and S/W Activation Key(s) You will be required to register the S/W Serial Number(s) and S/W Activation Key(s) for your OfficeStation unit(s) either via the Internet or through out offline methods mentioned during setup. If you eventually need to change the Host PC (or the hard drive within the original Host PC) after you have completed the registration process, the registered S/W Serial Number(s) and S/W Activation Key(s) should be unregistered prior to the change.
  • Page 6 How to Use OfficeStation (L110) For more information about installation and settings, see contents of the user’s guide. Install OfficeStation. (Connect the peripheral devices to the OfficeStation terminal) Install the software on the Host PC. Setup the network configuration of the Host PC. (If you are using the Internet) Press the OfficeStation power button and set the configuration of the OfficeStation.

  • Page 7: Unpacking The Box

    Remove all the items from the box and make sure that the box includes the following items. User's Guide Software Installation CD (Optional) OfficeStation(L110) System Direct LAN (CAT5 LAN) Cable AC Power Adapter AC Power Adapter + AC Power Cable (Optional) ▶...
  • Page 8 Connecting Peripheral Devices ₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩ 1-8 Software Installation and Operation Chapter 2 Installing the Software ₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩ 2-2 Setting up Network Configurations₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩ 2-10 Using the Software ₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩ 2-22 OfficeStation (L110) Console Management ₩₩₩₩₩₩₩₩₩₩ 2-46 APPENDIX FAQ₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩ A-2 Glossary ₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩ A-12 FCC Information to Use ₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩₩ A-13...
  • Page 9 Introductions Overview Connecting Peripheral Devices...
  • Page 10 Introductions What is OfficeStation (L110)? OfficeStation is an unique networking device using WoIP(Windows over IP) based on networking standards. You can share the resources of the Host PC system by connecting OfficeStation terminal(s) to it, thus giving you the benefit of having several networked PCs. You can connect one or more OfficeStation terminals to one Host PC directly using a LAN adapter and cable or via network using a hub/router.
  • Page 11 OfficeStation (L110) Conceptual Diagram Host PC Operates as a Host PC or terminal server. Windows 2000 Professional or Windows XP Home Edition/Professional or Windows 2000 Server or Windows Server 2003 (Standard Edition/Enterprise Edition) 10 OfficeStations User User User User User...

  • Page 12: System Requirements

    System Requirements Host PC ● To connect one OfficeStation terminal to a single Host PC, the following system requirement is needed of the Host PC : ® ® Intel Pentium 4 1.3 GHz processor with at least 256 MB RAM or higher. ●...
  • Page 14 Overview Front Power Indicators Lights up when the system is on. LAN Operation Indicator Blinks when OfficeStation communicates with Host PC. Ready Indicator Lights up when OfficeStation configuration is ready communicate with Host PC.
  • Page 15 Rear LAN (RJ45) Port Power Switch To connect OfficeStation to the Host PC, Turns On/Off the system. plug the network cable into the Host PC. Power Inlet(DC-IN) Jack PS/2 Keyboard Port Connection for AC power adapter. Connection for a PS/2 keyboard. Speaker/Headphone Jack PS/2 Mouse Port Connection for speakers or headphone.

  • Page 16: Connecting Peripheral Devices

    Connecting Peripheral Devices To connect the peripheral devices to OfficeStation, refer to the following. (The peripheral devices are optional) Connecting the Peripheral Device Connect Ehternet Cable Connect Power Cord...
  • Page 17 Connecting OfficeStation (L110) with Host PC Direct Connecting Host PC (Optional) User Cross Cable Connecting via Network Hub or Router Host PC (optional) Direct LAN Cable Hub or Router(optional) (supports over 100 Mbit switching) Direct LAN Cable User 1 User 2...
  • Page 18 Installing the Software Setting up Network Configurations Using the Software OfficeStation (L110) Console Management...

  • Page 19: Installing The Software

    Installing the Software Before you install the software, please check the connection of the OfficeStation terminal with the Host PC. Refer to the following steps : Installing NCT-2000-XP Turn on the Host PC and insert the Software Installation CD into the CD drive after after your computer boots up.
  • Page 20 If the server has the latest version, You will be asked if you want to install the latest version as shown on the left. Click “Yes” if you want to install, or click “No” if you want to install the version on the CD. The new version will be downloaded as shown on the right when installing.
  • Page 21 Once the license agreement window appears, check "I agree" and click "Next". If you do not agree with the license agreement, click "Cancel" to finish the process. If you want to print in out, please click the “Print” . When the NCT-2000-XP-Terms of use window appears, check "I agree" and click "Next".
  • Page 22 Select the installation default folder and click "Next". The “Program Files” is the default installation folder. If the screen same as the one shown on the right appears, select the item that you want to install after confirming the following reference and click the “Next”.
  • Page 23 Click "Next". After collecting of Help Information, program files will be copied to the hard disk drive.

  • Page 24: Uninstalling Software

    When the program installation is completed, the message screen for user adding will be appeared.(Refer to the screen) For more details, please refer to "Create a new account" of operating system. When the user adding is completed you will be asked to restart the system(Refer to the below screen).
  • Page 25 When NCT-2000-XP remove wizard window appears, click "Next". (If you set the Administrator Password, type the password and click "Next") Click “Next”. Instruction message similar to the one shown in the figure appears if a serial number is registered. If a serial number is to be unregistered, click “unregister now”. Refer to “NCT-2000-XP Internet Registration”...
  • Page 26 NCT-2000-XP is being deleted. After the programs have been removed from your computer, check “Yes, I want to restart my Computer now” and click "Restart" to reboot your computer.

  • Page 27: Setting Up Network Configurations

    Setting up Network Configurations If your computer is using Windows 2000 or XP or 2000 Server or Server 2003 and has a network adapter, you have to configure the network to connect with any OfficeStation terminal(s). To configure your computer's network configurations, please refer to the following : Connecting to the Network by Using a Cable/DSL Router (Support 100 Mbit Switching and DHCP Function) If you use a Cable/DSL router, you can use dynamic IP addresses.
  • Page 28 Check "Obtain an IP address automatically" and "Obtain DNS server address automatically," and then click “OK”. <Windows XP> <Windows 2000> Turn on the OfficeStation terminal for configuration settings. Click the “Setup”. <Press the power button of OfficeStation.>...
  • Page 29 Viewing the monitor connected to the OfficeStation terminal, the Setup window will appear. In the “Network” tab, check “Get Dynamic IP address”. In the "TS Options" tab, "Autodetect" would be activated as the default setting for automatic connection to the Host PC. If it is not connected properly, or if you want to run the “Fail-over”...
  • Page 30 ▶ You have to know the allocated IP address that the Host PC received automatically. You can see the IP address of the Host PC as follows : Click "Start" on the Host PC. Click “Run”. <Windows XP> <Windows 2000> Type “cmd”...
  • Page 31 Type "ipconfig" in the DOS command line and press Enter. IP address, Subnet mask, and Gateway that was allocated to the Host PC will be displayed on the screen. Input the displayed IP address into Terminal Server network address. If you finished the setting, click “Save”. Click “Connect”. (or Try Again) Your OfficeStation terminal should be connected to the Host PC.
  • Page 32 (In Windows 2000, click “Internet Protocol (TCP/IP)” and click the “Properties”) <Windows XP> <Windows 2000> Check “Use the following IP address” and input the address of the IP address, Subnet mask, and Default Gateway, and then click “OK”. <Windows XP> <Windows 2000>...
  • Page 33 Turn on the OfficeStation terminal for configuration. Click the “Setup”. <Press the power button of OfficeStation.> In the “Network” tab, check "Use Static IP address" and input the IP and Gateway address you want to use. In the "TS Options" tab, select "TS 2" and click "Edit"...
  • Page 34 Directly Connecting the OfficeStation (L110) terminal to a Host PC <Host PC> Host PC has one LAN adapter and no connection to the Internet Click “Start” and click “Control Panel”. (In Windows 2000, click “Start”, click “Settings”, and then click “Control Panel”) Click “Network and Internet Connections”, and then click “Network Connections”.
  • Page 35 Click “Internet Protocol (TCP/IP)” and click the “Properties”. <Windows XP> <Windows 2000> Check "Use the following IP address" and input as below and click “OK”. (For example, IP Address is 192.168.0.1 and Subnet mask is 255.255.255.0. According to the Host PC's configuration, the IP address should be different) <Windows XP>...
  • Page 36 Click the “Setup”. <Press the power button of OfficeStation.> In the “Network” tab, check "Use Static IP address" and input IP and Gateway address as below. (For example, IP address is 192.168.0.1 and Subnet mask is 255.255.255.0. According to Host PC's configuration, the IP address should be different) In the “TS Options”...
  • Page 37 Host PC has two LAN adapters and one of the LAN adapter connected to the Internet If your Host PC has only one LAN adapter connected to the Internet, you have to install the LAN adapter to connect the OfficeStation terminal to your Host PC.

  • Page 39: Using The Software

    Using the Software If you install the software, you can see the group and its program lists. To see the software group and lists, click “Start”, click “All Programs”, click “NCT-2000-XP”. Running NCT-2000-XP Console Using NCT-2000-XP Console you can control the OfficeStation terminal. To run NCT-2000-XP Console, double click the NCT-2000-XP Console icon on the taskbar.
  • Page 40 Explaining Software Settings(local) Function You can refer to the options and function of each option. If you select the “Software Settings(local)” window, you will be able to see the “NCT-2000-XP Management Console” window. Type the password and click “OK”. (If you select the “Disable password protection”option, during software installation, the “NCT-2000-XP Management Console”...
  • Page 41 Station #01 If you select this item, you can see the lists of the operating programs and information for each connected OfficeStation terminal. Stop Station This is a shortcut icon to logoff of the connected OfficeStation terminal. Send Message This is an icon to send message from Host PC to OfficeStation terminal or send the message to OfficeStation terminal connected to the Host PC.
  • Page 42 Viewing the Information of Each Station Application loaded This shows the running process lists of the connected OfficeStation terminal(s). Information Shows the information of the connected OfficeStation terminal(s). Explanation of Information Items ● Station Name : Number of station selected. Number is assigned as it is connected to the Host PC. ●...

  • Page 43: Information & Settings

    Information & Settings Product Information Shows the product information, manufactured date, manufacturer, copyright, and web site for technical support. User License Information Shows the user information.
  • Page 44 System Settings Shows the general system information. Maximum number of stations : Shows the maximum number of stations that can be connected to a Host PC. Current number of stations : The number of stations which are currently logged on to the Host PC.
  • Page 45 Serial Numbers Depending on the product, either user has to input the serial number or the serial number is automatically input (for the product with serial number included) when installing the software. In order to input manually, click right mouse in the right side of the screen. Add Serial Number : You can add the serial number when a window appears.

  • Page 47: Software Settings (Lan)

    Software Settings (LAN) You can see the information of the Host PC or OfficeStation terminal that is connected on the network. NCT-2000-XP Internet Registration To register via Internet, follow these steps : ▶ Serial number and activation key for the product purchased should be registered by user using internet or other method. Serial number should be unregistered when changing to new computer, reformatting or changing hard disk.
  • Page 48 Click “Start”, click “All Programs”, click “NCT-2000-XP”, and then click “NCT-2000-XP Internet Registration”. Click “Next”. (If you entered an administrator password, please input it) ▶ If you select the “Disable password protection” option, during software installation, the window requiring the password will not appear.
  • Page 49 Input user information correctly and click “Next”. Choose one of the methods to register and click “Next”. ● On Line : Connected to the internet “On Line – Register by Internet” “On Line – Unregister via Internet” ● Off Line : Not connected to the internet or on-line registration is not available “Off Line –...
  • Page 50 ▶ “On Line – Register by Internet” Option This option can be used to register by connecting directly to the Ncomputing's FTP server when the Host PC with NCT-2000-XP installed is connected to the internet. Program update and technical support can be provided only if serial number and user are registered. Select “On Line - Register by Internet”...
  • Page 51 ❹ Start registering the serial number if all information is correct. Registration may not be completed if Host PC is turned off or internet is disconnected during registration. ❺ Registration is complete. Click “Finish”. ▶ “On Line – Unregister via Internet” Option Serial number should be unregistered before NCT-2000-XP is deleted when existing Host PC is to be changed or hard disk is to be reformatted after serial number is registered.
  • Page 52 Select serial number to be unregistered and click “Next”. Screen showing user's registration information appears. Click “Back” if information needs to be changed, otherwise click “Next” to continue. ❹ Start unregistering serial number if all information is correct. Registration may not be completed if Host PC is turned off or internet is disconnected during registration.
  • Page 53 ❺ The unregistration process is complete. Click “Finish”. ▶ “Off Line – Registration via File/Email” Option This option can be used when the Host PC with NCT-2000-XP installed is not connected to the internet or on-line registration is not available. After selecting “Off Line - Registration via File / E-mail Document”...
  • Page 54 Screen showing user's registration information appears. Click “Back” if information needs to be changed, otherwise click “Next” to continue. ❹ Select file path and name to be created and click “Next”. Default file path and name are “My Document” and “RGFSerialNumber.txt”, respectively. ❺...
  • Page 55 ▶ “Off Line – Unregistration via File/Email” Option This option must be used when canceling registration after registered through registration center or agent using file created with “Off Line - Registration via File / E-mail Document” option. After creating file needed for canceling registration, send the data file by e-mail from other computer with internet connection or send the diskette or CD to the product supplier or agent so that they can assist you in canceling registration.
  • Page 56 ❹ Select file path and name to be created and click “Next”. Default file path and name are “My Document” and “URGFSerialNumber.txt” respectively. ❺ The unregistration process is completed. Please send the file created to the registration center or agent. Serial number can be reused later only if registration is cancelled by the registration center or agent using file created.
  • Page 57 Select serial number to be canceled and click “Next”. Screen showing user's registration information appears. Click “Back” if information needs to be changed, otherwise click “Next” to continue. The "Cancel Registration" process is complete. Click “Finish”.
  • Page 58 ▶ “Off Line – Key Input” Option This option is used to register serial number after sending file created using “Off Line - Registration via File / E-mail” option to and receiving text file from the registration center or agent. Select “Off Line - Key input”...
  • Page 59 NCT-2000-XP Internet Update If you finished registering, you can update your NCT-2000-XP via Internet. Update via File With the file that you downloaded via the Internet, (On a diskette, hard disk drive, CD, or USB memory stick) you can update the NCT-2000-XP. (In this case, you have to finish the user registration.
  • Page 60 When the “Enter Password” window appears, type the password and click “OK”. (If you select the "Disable password protection" option, during software installation, the window requiring the password will not appear) To do continuous upgrade, you have to do “Internet Registration”. If you have already registered, update will go on by click the “Register later”.
  • Page 61 Installed version and the version in the FTP can be confirmed. If FTP has newer version, click “Download” to download. (Download may take some time depending on the internet speed) After finishing download of update file, program set up will proceed as Section 2-3 of "Software installation and operation".
  • Page 63 OfficeStation (L110) Console Management Thank you for buying the NComputing OfficeStation terminal(s). This User’s guide tells you how to use and configure the OfficeStation terminal(s). This program user's guide follows the basic process that you will use to setup and use the administrator console and improve the security of your shared Host PC environment.
  • Page 64 Click “Hardware settings(LAN/Local)” in the NCT-2000-XP Console menu. Connected with Host PC in Local Network. (Green Color Icon) Disconnected with Host PC in Local Network. (Blue Color Icon) Turn Off state but as of old connected with Host PC more than one times. (Red Color Icon) Choose the one “UTMA/UTSA Devices”, and double click OfficeStation Device setup Icon.
  • Page 65 Connections Settings : OfficeStation setup → Same item as “TS option” setup and can change the settings for the Host PC to be connected.(Remote OfficeStation connection include auto connection) Network Settings : OfficeStation setup → Same item as “Network” and can change. Setup Password and Language : OfficeStation setup →...

  • Page 66: Auto Connection Function

    Auto Connection Function With the “Auto Connection” function, you can easily connect to a Host PC without using the OfficeStation main setup screen. Turn On your OfficeStation device. Next, you will automatically go into the Windows Logon dialog box screen without having to press the “Connect” . Fill in the “User name”...
  • Page 67 Introducing the Auto connection setup Setting up your Auto Connection menu from OfficeStation main setup Click “Setup” to setup your connection menu. Click “TS Options”. Select “TS 2” then click “Enable/Disable”. (You must Disable the Autodetection selection) Click “Edit” to select the option menu. Click “Autoconnect Enabled”.
  • Page 68 Setting up your Auto Connection menu from NCT-2000-XP Console Click “Hardware Settings (LAN/Local)” menu from NCT-2000-XP Console. Click “UTMA/UTSA Devices” setup menu. Select the target OfficeStation devices then double click. Click “Connection Settings” to connection settings. Click “TS 2” connection profile. (You must Disable the Autodetection selection) Click “OK”...
  • Page 69 Auto Logon Function With the “Auto Logon” function, you can easily connect to a Host PC(s) without fill in the Windows Logon dialog box. Turn on your OfficeStation device. Click “Connect” of main setup screen. Automatically go in to the Windows main screen due to setting the “User Name”...
  • Page 70 Introducing the Auto Logon setup Setting up your Auto Logon menu from NCT-2000-XP Console. Click “Hardware Settings(LAN/Local)” menu from NCT-2000-XP Console. Click “UTMA/UTSA Devices” setup menu. Select target OfficeStation devices then double click. Click “Connection Settings” to connection settings. Select connection profile(Autodetection, TS 2, TS 3). Click “Edit”...

  • Page 71: Usb Device Assignment(S)

    USB Device Assignment(s) The USB port in the Host PC can be set to use USB storage devices connected to the Host PC in each OfficeStation. When a USB storage device is connected, the USB storage devices connected to each port is shown on the screen. Change the settings by clicking the applicable port for each USB storage device connected that is to be used in the OfficeStation or applicable Host PC.
  • Page 72 Click “Use default prevent setting from system settings” then select “UTMA MAC Address” to share the USB Port Assignment(s). Click “Apply”. View Screen and Management Function Through the console you can view the screen of the OfficeStation selected. Users must have Admin authority to activate this function. Introducing the View Screen setup Setting up your View Screen menu from the NCT-2000-XP Console.
  • Page 73 OfficeStation(s) Management Introducing Management setup Click the right mouse button on the menu bar of selected user form view screen. Click “Controlled By TS Admin” to control OfficeStation screen. (“User Input Allowed” menu is used to allow the OfficeStation user to control the main screen) ▶...
  • Page 74 Glossary FCC Information to Use...

  • Page 75: Network Configuration Setting

    Network Configuration Setting How do I connect the OfficeStation directly to the Host PC? Use a crossover adapter to connect the OfficeStation terminal to the Host PC. If you use a crossover cable to connect to the Host PC, you do not need a crossover adapter. You can only directly connect one OfficeStation to a Host PC by using a LAN adapter.
  • Page 76 If a router/hub is connected to the Host PC, how do I connect an OfficeStation terminal to the Host PC with a static IP address? You have to allocate the static IP address of the Host PC and the OfficeStation to OfficeStation terminal(s) through a router/hub. (Contact your network manager to get the static IP address of the Host PC) <Static IP>...
  • Page 77 I am not connected and a screen displays the "DHCP server was not found" message. ● OfficeStation is set to get the IP address dynamically. If you enter the setup screen of the OfficeStation by pressing “Setup”, you can check in the “Network” tab and make sure that the "Get Dynamic IP Address" option is selected. To use this option the router has to have DHCP server functionality activated.
  • Page 78 6. Remove the check for the “Remote Desktop” option in the “Advanced” tab of the “Advanced Settings” window. ● If you use a certain firewall program that blocks the outer connection, you can't use your OfficeStation terminal. ● Turn off the OfficeStation terminal and wait several seconds, and then turn it on. ●...
  • Page 79 What games can I play? You can run only 2D games and Internet casual games such as a java and flash type. Refer to the list below for what is not supported through OfficeStation : ● 3D games that require GPU or hardware accelerator. ●...
  • Page 80 I can't connect the OfficeStation to the Host PC anymore. After you install patch files from Windows update, this can occur. Please uninstall the patch files or download and install the updated OfficeStation software from our FTP site. It might take some time for us to upload the updated software. I want to upgrade the speed of the OfficeStation.
  • Page 81 When “Connect” is clicked in OfficeStation, “TS ERROR - INVALID OR NO SERIAL NUMBER” message appears and no connection is made. This message appears when there is no serial number in the Host PC that OfficeStation is trying to connect to. To be connected to OfficeStation, serial number should be registered in the NC-2000-XP console of the Host PC.
  • Page 82 Connection stops after the message shown in the following figure appears. MS Windows regularly checks for important updates and install them for you. If automatic update in the “Security Center” of “Control Panel” is selected, update will be automatically downloaded at selected day and time without asking user. This could happen since security update files are related with NCT-2000-XP, and therefore, automatic update should not be selected by clicking "Notify me but don't automatically download or install them"...
  • Page 83 I have changed screen resolution setting in Windows, however, resolution changes after log off and on again. OfficeStation itself has ability to set screen resolution. In the initial screen of OfficeStation, select “Setup” → “TS Options” → “Edit” and screen same as the figure shown above appears.(resolution in the figure may vary depending on the product) Resolution selected in this way becomes the basis when logging on Windows and even if user sets different resolution in Windows, resolution set in OfficeStation will...
  • Page 84 Desktop background selected in Windows disappears whenever OfficeStation is logged on OfficeStation? User has option to show or not to show the background selected in Windows. After executing NCT-2000-XT, select “Software Setting (local)” → “Information & Settings” → “System Settings” and screen same as figure appears.
  • Page 85 Glossary Multi user WoIP(Windows over IP) New network protocol that enables a PC to operate multi windows simultaneously in virtual memory and the registered multi user can access through TCP/IP by using OfficeStation. This technology does not require a high priced server and supports the multi user access through terminal.
  • Page 86 FCC Information to Use Note This equipment has been tested and found to comply with the limit for a Class B digital device, pursuant 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions.
  • Page 87 Headquarter Office 2nd Floor, Daeyoung Bldg, 1423-6, Gwanyang1-Dong, Dongan-Gu, Anyang-City, Gyeonggi-Do, Korea 431-870 Changing the way of network computing TEL : 82-31-422-5157 www.ncomputing.com FAX : 82-31-422-5158 For further product and sales inquiry, Email : sales@ncomputing.com please contact us: Hardware R&D, Techsupport 2nd Floor, Daeyoung Bldg, 1423-6, Gwanyang1-Dong, Dongan-Gu, Anyang-City, Gyeonggi-Do, Korea 431-870 TEL : 82-31-422-5157...

Table of Contents