Introduction - Behringer B-CONTROL DEEJAY BCD3000 User Manual

4
B-CONTROL DEEJAY BCD3000 User Manual

1. Introduction

The BCD3000 features 2 first-class Phono preamps, one of which is switchable
to the CD input. The sophisticated Headphone section includes a PFL function
as well as the option to monitor the master output signal directly. Start/Stop,
Cue, Loop and Pitch-Bend have dedicated controls to support your intuitive
performance, plus 4 user-assignable controls and buttons are available in the
Effects section. Benefit now from the huge potential that modern laptops have to
offer, with the real-time accessibility to digital sound files of different formats!
◊
The following user's manual is intended to familiarize you with the
unit's control elements, so that you can master all the functions.
After having thoroughly read the user's manual, store it in a safe place
for future reference.
1.1 Before you get started
1.1.1 Shipment
The BCD3000 was carefully packed at the assembly plant to assure secure
transport. Should the condition of the cardboard box suggest that damage may
have taken place, please inspect the unit immediately and look for physical
indications of damage.
◊
Damaged equipment should NEVER be sent directly to us. Please inform
the dealer from whom you acquired the unit immediately as well
as the transportation company from which you took delivery.
Otherwise, all claims for replacement/repair may be rendered invalid.
◊
To assure optimal protection of your B-CONTROL during use or
transport, we recommend utilizing a carrying case.
◊
Please always use the original packaging to avoid damage due to
storage or shipping.
◊
Never let unsupervised children play with the B-CONTROL or with
its packaging.
◊
Please dispose of all packaging materials in an environmentally
friendly fashion.
1.1.2 Initial operation
Please make sure the unit is provided with sufficient ventilation, and never place
the B-CONTROL on top of an amplifier or in the vicinity of a heater to avoid the
risk of overheating.
A power supply unit which meets the necessary safety requirements is enclosed
for connecting the B-CONTROL to the mains.
Important information for installation
◊
The sound quality may diminish within the range of powerful
broadcasting stations and high-frequency sources. Increase the
distance between the transmitter and the device, and use shielded
cables for all connections.
1.1.3 Online registration
Please register your new BEHRINGER equipment right after your purchase
by visiting http://behringer.com and read the terms and conditions of our
warranty carefully.
Should your BEHRINGER product malfunction, it is our intention to have it
repaired as quickly as possible. To arrange for warranty service, please contact
the BEHRINGER retailer from whom the equipment was purchased. Should your
BEHRINGER dealer not be located in your vicinity, you may directly contact
one of our subsidiaries. Corresponding contact information is included in the
original equipment packaging (Global Contact Information/European Contact
Information). Should your country not be listed, please contact the distributor
nearest you. A list of distributors can be found in the support area of our website
(http://behringer.com).
Registering your purchase and equipment with us helps us process your repair
claims more quickly and efficiently.
Thank you for your cooperation!
1.2 Features with Mac OS X
When using the BCD3000 with a Mac, there are several limitations in comparison
to using it with Windows.
• Hardware driver is not required.
• Input A is only switchable between the Microphone and Phono input by
using MIDI commands.
• The outputs are dedicated: channels 1-2 are always routed to MASTER OUT
and channels 3-4 are routed to PHONES.
• The properties of the MIDI interface and LED cannot be reconfigured.
• Control Panel software to control the latency is not required.
1.3 System requirements
Minimum system requirements for PC:
• Processor: Pentium III / Athlon XP 1 GHz
•
1 free USB port (USB 1.1 or higher)
• CD drive
• 512 MB RAM
• OS: Windows XP SP 2
Minimum system requirements for Mac:
• Processor: G4 1.5 GHz or Dual Core 1.6 GHz
• 1 free USB port (USB 1.1 or higher)
•
CD drive
• 512 MB RAM
• OS: Mac OS X 10.4