Step-By-Step Installation - Behringer B-CONTROL DEEJAY BCD3000 Quick Start Manual

Podcast

Hide thumbs Also See for B-CONTROL DEEJAY BCD3000:

Table of Contents

B-CONTROL BCD3000 PODCAST QUICK-START GUIDE

Step-by-step installation

Now that you know the terminology and have all the gear you will need to

produce high-quality audio podcasts, it's about time you set up the equipment,

install the software and get started.

1. Install the drivers provided on the BEHRINGER software CD when using a

computer with a Windows operating system (not required for Mac OS X operating

systems).

2. Connect your new BCD3000 controller interface to your computer with the

included USB cable.

3. Connect 2 turntables or a single turntable and an additional sound source (for

example, a CD player) to the respective RCA connectors of the BCD3000

interface. When a turntable is connected to the analog input, remember to switch

to Phono.

4. Connect a microphone to the XLR Microphone input of the BCD3000

interface.

5. Connect a pair of headphones to the console's Headphone output. Should

you want to monitor the recording sessions with loudspeakers, connect the

Master output to your hi-fi system or a pair of active speakers.

Version 1.0

Table of Contents

Do you have a question about the B-CONTROL DEEJAY BCD3000 and is the answer not in the manual?