Using Your Gateway Flat-Panel Monitor • Connecting the monitor • Adjusting the stand • Starting the monitor • Adjusting monitor settings • Changing Windows screen settings • Using the speaker bar • Power management • Maintaining • Troubleshooting • FAQs •...
Rotate the screen 90° to make it easier to connect the cables. Position your computer and the monitor so you can reach the back of each. Make sure that you computer is turned off. Using Your Gateway Flat-Panel Monitor Thumbscrew Thumbscrew...
Page 7
If your computer has an HDMI digital audio/video connector, connect an HDMI cable to the HDMI connector under the back of the display. Important An HDMI cable has not been included with your monitor. A cable can be purchased from www.gateway.com...
Connect the included USB cable to the USB in (“B” type) port on the back of your monitor, then connect the other end of the cable to a USB 2.0 port on your computer. Using Your Gateway Flat-Panel Monitor DVI port...
Connect any USB device to one of the available USB 2.0 ports on the left side or back of the monitor. Setting up the optional speaker bar An optional speaker bar is available for mounting underneath your monitor. You can order a speaker bar from www.gateway.com. To install the speaker bar: Turn off the monitor. Important If you connect the speaker bar to the monitor while the monitor is turned on, the speaker bar will not initialize and will not work correctly.
Page 10
To remove the speaker bar: Disconnect all audio and power cables from the speaker bar. Press the two clips on the back of your monitor, then slide the speaker bar back. Using Your Gateway Flat-Panel Monitor Audio jack Mounting clip ANALOG “Using the speaker bar”...
You can secure your monitor to your computer desk (or to another heavy object) with a cable lock. To connect a cable lock, follow the cable lock’s instructions to connect it to the Kensington lock slot on the back of your monitor (cable lock not included). Kensington lock slot www.gateway.com...
The screen should be tilted so your line of sight is perpendicular to the screen. This angle creates the most consistent viewing distance when scanning from the top of the screen to the bottom. You may need to adjust lighting to avoid screen glare when the screen is tilted upward. Using Your Gateway Flat-Panel Monitor Portrait mode...
Adjust the tilt of the monitor for the best viewing angle. For VGA input only: After you see the Windows desktop, touch the the front of your monitor, then touch to the ideal settings. www.gateway.com “Using the EzTouch menu Power button “Troubleshooting” on page...
To completely “release” a touch button, make sure that you lift your finger well away from the button. Using Your Gateway Flat-Panel Monitor (Menu) on the front of your monitor. The rest of the button icons light up and the...
Page 15
To use an EzTouch menu button, lightly touch its icon. For adjusting a setting’s values, you can press and hold touch buttons as you would conventional buttons. Theme Select Input Select (Mute when optional speaker bar is connected) Auto (Input Select when optional speaker bar is connected)
Touch the Touch When you have finished making all adjustments, touch Using Your Gateway Flat-Panel Monitor (Menu) on the front of your monitor. The rest of the button icons light up and the (Main Menu). The main menu opens. Choose option or mode, Adjust...
Page 17
Windows desktop, which makes it easier to access your computer programs while watching video. Swap—Switches the PIP image to the main image, and the main image to the PIP image. PIP Picture—Opens a menu where you can set the PIP brightness, contrast, saturation, and tint/hue. www.gateway.com...
Page 18
V Position—Moves the display image up and down. You can also touch Auto to configure the vertical and horizontal position automatically. Clock—Minimizes any vertical bars or stripes visible on the screen background. The horizontal screen size will also change. Phase—Minimizes any horizontal distortion and clears or sharpens the displayed characters. Using Your Gateway Flat-Panel Monitor...
Adjust the video scaling mode to Wide on the monitor. Change the resolution of the Windows desktop to match the monitor’s full resolution of 1920 × 1200. For more information see “Changing color depth and screen resolution” on page www.gateway.com Main display D-Sub/VGA**...
Click Apply. If the new settings do not look right, click No. If the new settings make the screen illegible and you cannot click No, the settings return to their previous values after several seconds. Click OK. Using Your Gateway Flat-Panel Monitor (Start), Control Panel, then under Appearance and Personalization, click Adjust NTER ®...
With EzTune, you can: • Change the orientation of the image (landscape to portrait) by just rotating the screen (requires the optional height-adjustable stand available in the U.S. at www.gateway.com) • Change brightness, contrast, and color balance •...
Do not use any type of abrasive pad or glass cleaner. You will permanently scratch the screen. • To clean the monitor, use a soft cloth slightly moistened with water only. Wipe the cabinet, screen, and controls. Using Your Gateway Flat-Panel Monitor LED Indicator Power Consumption Blue <150 W Orange <2 W...
If the monitor is functioning correctly, a “No Signal” message appears. For more information about connecting the video cable, see “Connecting the monitor” on page www.gateway.com (Menu), then (Input Select) to make sure that you have selected the correct (Menu), then touch (Input Select) to choose another input.
This condition is normal and inherent in the TFT technology used in active-matrix LCD screens. Gateway’s inspection standards keep these to a minimum. If you feel these pixels are unacceptably numerous or dense on your display, contact Gateway Customer Care to identify whether a repair or replacement is justified based on the number of pixels affected.
Your microphone jack may have been muted using Windows sound controls. To check your microphone’s mute settings, click the speaker icon in the Windows taskbar, or click Control Panel, Sounds and Audio Devices, the Volume tab, then click Advanced. www.gateway.com (Start), Control Panel, Sounds and Audio Devices, the Volume tab, then click (Menu),...
Make sure that your video card can display at 1920 × 1200 resolution. • This may be caused by older video drivers on your computer. See the Gateway support Web site (support.gateway.com) for updated video drivers for your computer. You can also go directly to your video card’s support Web site for the most up-to-date video drivers.
4:3 results in compressed video. This is done differently on all brands of video devices, so it is important that you read your video device user guide or the help tools within your video device’s software. www.gateway.com...
If your game console supports HDMI or Component (YPbPr), this results in the best picture quality. Specifications Specifications are subject to change without notice or obligation. Many products for Gateway and its subsidiaries are custom engineered by our suppliers to Gateway specifications and may vary from similarly marketed products.
Page 29
Included cables 15-pin mini d-sub analog VGA DVI cable USB A-B Power Power consumption Normal operation: <150 W Standby mode: <2 W Off: <1 W Power input 100~240 VAC, 50/60 Hz (built-in power supply) Certifications UL, cUL, FCC Class B, CE, PSE, NOM, VCCI Wall mount bracket VESA 4 3.937 inches (4 100 mm)
Your Gateway product is designed and tested to meet the latest standards for safety of information technology equipment. However, to ensure safe use of this product, it is important that the safety instructions marked on the product and in the documentation are followed.
When your electrical or electronic equipment is no longer useful to you, “take it back” to your local or regional waste collection administration for recycling. In some cases, your “end of life” product may be “traded in” for credit towards the purchase of new Gateway equipment. Call Gateway to see if this program is available in your area.
(2) this device must accept any interference received, including interference that may cause undesired operation. Caution Changes or modifications not expressly approved by Gateway could void the FCC compliance and negate your authority to operate the product. California Proposition 65 warning This product contains chemicals known to the State of California to cause cancer, birth defects, and/or other reproductive harm.
Due to continuing system improvements, Gateway is not responsible for inaccurate information which may appear in this manual. For the latest product updates, consult the Gateway Web site at www.gateway.com. In no event will Gateway be liable for direct, indirect, special, exemplary, incidental, or consequential damages resulting from any defect or omission in this manual, even if advised of the possibility of such damages.
Utilisation de votre moniteur à écran plat Gateway • Connexion du moniteur • Réglage du socle • Démarrage du moniteur • Ajustement des paramètres du moniteur • Modification des paramètres d’écran Windows • Utilisation de la barre de haut-parleurs •...
Utilisation de votre moniteur à écran plat Gateway Connexion du moniteur Pour installer le moniteur, montez-le sur son socle, puis connectez les câbles. Fixation du socle Procédure de montage sur le socle : Déposez le moniteur sur une surface lisse avec l’écran tourné vers le bas. Un tapis antidérapant sur une table est idéal.
Page 41
Si votre ordinateur est muni d’un connecteur audio/vidéo numérique HDMI, connectez un câble HDMI au connecteur HDMI à l’arrière du moniteur. Important Un câble HDMI n’a pas été inclus avec votre moniteur. Vous pouvez acheter un câble au www.gateway.com (disponible aux Etats-Unis uniquement) ou dans divers magasins de vente d’électronique au détail ou revendeurs Internet.
Utilisation de votre moniteur à écran plat Gateway Connectez les autres sources vidéo (lecteur de DVD, caméscope, récepteur, etc.) aux prises vidéo appropriées sur l’arrière du moniteur. • Pour obtenir une qualité vidéo de base, reliez la prise entrée vidéo composite de votre périphérique vidéo à...
Installation de la barre de haut-parleurs optionnelle Une barre de haut-parleurs en option peut être montée au-dessous de votre moniteur. Pour commander une barre de haut-parleurs, visitez le site Web www.gateway.com. Pour installer la barre de haut-parleurs : Éteindre le moniteur.
Page 44
Utilisation de votre moniteur à écran plat Gateway Branchez les prises électrique et audio de la barre de haut-parleurs dans les connecteurs appropriés situés en dessous du moniteur. Connecteur d’alimentation Branchez les prises audio 3.5 rose et verte de la barre de haut-parleurs dans les connecteurs de haut-parleur et de microphone appropriés situés sous l’ordinateur.
Vous pouvez utiliser un câble antivol pour attacher votre moniteur à votre bureau (ou à tout autre objet lourd). Pour installer un câble antivol, suivez les instructions du fabricant et installez-le dans la fente antivol Kensington derrière le moniteur (câble antivol non inclus). Fente antivol Kensington www.gateway.com...
Utilisation de votre moniteur à écran plat Gateway Réglage du socle Rotation de l’écran Astuce Pour faire pivoter l’écran tandis que la barre de haut-parleurs en option est fixée, inclinez l’écran vers l’arrière pour bénéficier de plus d’espace entre la barre de haut-parleurs et le plan de travail.
• Bleu—Le moniteur détecte une source vidéo. Vérifiez les paramètres de luminosité. Voir « Dépannage » à la page 20 www.gateway.com « Utilisation des Bouton de mise sous tension pour obtenir plus d’informations de dépannage.
Utilisation de votre moniteur à écran plat Gateway La première invite que vous voyez est le menu de sélection de la langue. Vous devez choisir une langue par défaut pour l’affichage OSD avant de continuer. Astuce Pour modifier la langue sélectionnée une prochaine fois, utilisez le menu Avancé.
Page 49
Pour utiliser un bouton de menu EzTouch, vous n’avez qu’à en toucher légèrement l’icône. Pour régler la valeur d’un paramètre, vous pouvez enfoncer et tenir les boutons tactiles comme des boutons classiques. Sélection de thème Sélection d’entrée (« Sourdine » lorsque la barre de haut-parleurs en option est connectée)
Utilisation de votre moniteur à écran plat Gateway Utilisation du menu principal Procédure d’utilisation du menu principal : Touchez voyez apparaître le menu de raccourcis. Important Les boutons du menu EzTouch sont très sensibles et peuvent être activés simplement en les effleurant du doigt. Pour complètement « relâcher » un bouton tactile, assurez-vous de soulever le doigt loin du bouton.
Page 51
Inversion—Transfère l’image incrustée à la place de l’image principale et l’image principale à la place de l’image incrustée. Image incrustée—Ouvre un menu vous permettant de régler la luminosité, le contraste, la saturation et la teinte de l’image incrustée. www.gateway.com...
Page 52
Utilisation de votre moniteur à écran plat Gateway Menu OSD Description Menu Réglage À moins d’indication contraire, ces paramètres s’appliquent uniquement à la vidéo standard avec une vidéo définition ne dépassant pas 480i. Lorsque la mention « Entrée PC » apparaît, les résolutions applicables vont de 800 ×...
Page 53
Si vous rencontrez des problèmes de qualité vidéo, par exemple si vous voyez des ombres dans les images qui se déplacent rapidement, vous pouvez désactiver cette fonction pour revenir au temps de réponse d’origine de l’écran ACL. Réinitialiser tout—Réinitialise tous les paramètres du moniteur avec les valeurs d’origine du fabricant. www.gateway.com « Modification des paramètres...
Utilisation de votre moniteur à écran plat Gateway Utilisation de la fonction Incrustation d’images La fonction Incrustation d’images est très utile pour voir simultanément des images provenant de plusieurs sources vidéo. Le tableau suivant indique les combinaisons de sources vidéo pouvant être utilisées avec la fonction Incrustation d’images.
Avec EzTune, vous pouvez : • Changer l’orientation de l’image (horizontale ou verticale) simplement en faisant tourner l’écran (requiert le support optionnel à hauteur réglable disponible aux États-Unis sur www.gateway.com) • Modifier la luminosité, le contraste et l’équilibre des couleurs •...
Page 56
Utilisation de votre moniteur à écran plat Gateway Pour de plus amples informations, consultez le CD du programme ou l’aide en ligne du programme installé. Utilisation des modes horizontal et vertical EzTune fait automatiquement basculer l’affichage au mode approprié (horizontal ou vertical) lorsque vous tournez l’écran.
Panneau de configuration Windows. Pour plus d’informations, consultez le Manuel de l’utilisateur de votre ordinateur. www.gateway.com « Installation de la barre de haut-parleurs 5, la barre reçoit une alimentation constante de la prise de courant...
Utilisation de votre moniteur à écran plat Gateway Maintenance Pour s’assurer que le moniteur soit dans un état de fonctionnement optimal : • Ne bloquez pas les trous de ventilation. • N’exposez pas le moniteur à la pluie et ne l’utilisez pas près de l’eau.
En général, les ordinateurs portables offrent une combinaison de touches vous permettant de basculer entre l’écran de l’ordinateur et un écran externe. Sur les ordinateurs portables Gateway, cette combinaison est F la rangée supérieure de touches. Pour de plus amples informations, consultez le guide d’utilisation de votre ordinateur portable.
Cette situation est normale dans la technologie TFT utilisée dans les écrans ACL à matrice active. Les normes d’inspection de Gateway permettent de minimiser ce problème. Si vous pensez que ces pixels sont trop nombreux ou denses sur votre affichage, contactez le service d’assistance clientèle de Gateway pour déterminer si une réparation ou un remplacement...
En général, les ordinateurs portables offrent une combinaison de touches vous permettant de basculer entre l’écran de l’ordinateur et un écran externe. Sur les ordinateurs portables Gateway, cette combinaison est F la rangée supérieure de touches. Pour de plus amples informations, consultez le guide d’utilisation de votre ordinateur portable.
Il est possible que votre ordinateur utilise des anciens pilotes vidéo. Sur le site Internet de support Gateway (support.gateway.com), vous trouverez des mises à jour de pilotes vidéo pour votre ordinateur. Vous pouvez également vous procurer les plus récentes mises à jour des pilotes vidéo sur le site Internet de support du fabricant de votre carte vidéo.
Oui. Des câbles vidéo optionnels vous permettent de connecter une console de jeux directement au moniteur. Si votre console de jeux prend en charge la norme HDMI ou Composant (YPbPr), vous aurez la meilleure qualité d’image possible. www.gateway.com (Menu), (Réglage vidéo), puis...
Spécifications Les spécifications sont sujettes à modification sans préavis et sans obligation. Plusieurs produits de Gateway et de ses filiales sont conçus de façon personnalisée par nos fournisseurs, conformément aux prescriptions de Gateway, et peuvent être différents d’autres produits commercialisés de façon semblable sur le marché.
1440 × 900 1680 × 1050 1680 × 1050 1920 × 1200 1920 × 1200 www.gateway.com Poids Poids net (avec support) : 17,20 lbs. (7,8 kg) Avec le socle et la barre de haut-parleurs en option : 19,84 lbs (9 kg) Dimensions Socle en position basse : 22,48 ×...
Page 66
Utilisation de votre moniteur à écran plat Gateway...
Informations relatives à la sécurité, aux règlements et aux questions • Informations de sécurité importantes • Informations d’ordre environnemental • Énoncés sur la conformité aux règlements • Avis d’ordre juridique...
Votre système Gateway est conçu et testé de façon qu’il puisse satisfaire aux dernières normes de sécurité pour le matériel de technologies de l’information. Cependant, pour assurer une utilisation en toute sécurité de cet ordinateur, il est recommandé de suivre les instructions de sécurité...
Pour empêcher l’émission de substances dangereuses dans l’environnement et pour maximiser l’utilisation de nos ressources naturelles, Gateway fournit les informations suivantes sur la façon dont vous pouvez recycler ou réutiliser de façon responsable la plupart des matériaux dans votre « produit arrivé à la fin de sa vie ».
Page 70
: (1) Cet appareil ne peut pas causer d’interférence nuisible, et (2) cet appareil doit accepter toute interférence reçue, incluant une interférence pouvant causer un fonctionnement non désiré. Mise en garde Les changements ou modifications non approuvés expressément par Gateway peuvent annuler la conformité de la FCC et annuler votre autorisation d’utiliser l’ordinateur. Proposition 65 de la Californie Ce produit contient des éléments chimiques reconnus par l’État de la Californie comme pouvant causer le...
Page 71
à tout moment. En raison des améliorations apportées continuellement aux systèmes, Gateway n’est pas responsable des informations inexactes qui peuvent paraître dans le manuel. Consultez le site Web de Gateway à www.gateway.com, pour connaître les plus récentes mises à jour des produits. Gateway ne peut être tenue responsable de dommages, directs, indirects, spéciaux, exemplaires, accidentels ou consécutifs résultant d’une défaillance ou d’une omission dans ce...
Page 72
Informations relatives à la sécurité, aux règlements et aux questions d’ordre juridique...
Page 74
8512612 - MAN FHD2400H USR GDE R0 08/07...
Need help?
Do you have a question about the FHD2400H and is the answer not in the manual?
Questions and answers