Table of Contents
Advertisement
Welcome
About the Network Mediaplayer
Your Loewe TV set is equipped with the Network Mediaplayer. This allows
you to play back multimedia contents (photos, music files, videos) that are
saved on a data medium on your home network and are made available via
a media server (also see page 16). The Network Mediaplayer can access
various types of storage media on the network for this purpose (e.g. PCs,
Network Attached Storages (NAS)).
You can connect your TV set either wired (Ethernet, PowerLine) or also via
a wireless radio connection (WLAN) to your home network. The TV set has
wireless connections via an internal WLAN antenna. To operate it when there
is bad reception there is an additional antenna included (not with Connect ).
You will find connection examples on page 5 on the right.
The Network Mediaplayer supports UPnP AV standard.
You will find more detailed information in the technical data on page 16
and in the glossary from page 17.
All photos, albums and album graphics shown in these operating instructions
are just examples.
Help for problems with home network
Because of the wide variety of configurations of home networks, Loewe
cannot provide support for PC hardware and software or network
components.
For support with configuration of and maintaining network connections,
storage media, media server software and network devices, such as
routers (positions
,
and
4
5
please contact the administrator of your network and/ or the specialist
retailer.
- 4
in the connection examples on page 5)
8
Access to the MediaNetwork
Start the MediaNetwork using the Assist + menu.
Go to Assist + menu.
5 6 M ark MediaNetwork,
OK confirm.
Assist
+
TV
Radio digital
Teletext
DR archive
PhotoViewer
MusicBox
MediaNetwork
CA module
Index
END
Selection of menu items
Use the arrow buttons 5634 to move the marker on
the user interface.
Use the OK button to select or adopt the object you have
currently marked.
Use the 7 button to go back up a level respectively.
With the END button you return from any item in the
menu overview to the media selection (page 8).
This screen symbol shows you that the required operating
function is currently not available.
Exit MediaNetwork
Go to Assist + menu and select another function (see
above).
Or:
Press TV or RADIO button to change to the corresponding
type of operation.
Or:
Press END button in the media selection (page 8)
to change to the last previously active type of operation
(TV, radio).
The access to your PC network
OK
Advertisement
Table of Contents
Need help?
Do you have a question about the Network Mediaplayer and is the answer not in the manual?