Legal Notices - Insignia NS-37D20SNA14 Important Information Manual

Inputs
HDMI
Component video
Composite video
Shared audio (component
and composite)
S-Video
PC/VGA
3.5mm DVI audio input
DVI
USB
Antenna/Cable
Outputs
Video
Analog audio/Headphone
Digital audio
WiFi
Ethernet
Audio
Speakers
Power
Power consumption
Power input
Miscellaneous
OSD languages
INlink
Game Mode
ENERGY STAR qualified
Internet connectable
TV base screws
V-Chip (version 2.0)
Sleep timer
Channel labeling
VESA mount (mm)
(horizontal × vertical)
VESA mount screws
Note
The length of the wall-mount screws vary
depending on the wall-mount bracket you
purchased. See the instructions that came with the
wall-mount bracket for screw lengths.
6
2 (side)
E-EDID compliant
HDCP compliant
1 (back)
1 (back)
Shared with component Y
Yes
No
No
1 (side)
1 (side)
HDMI 1 (DVI+ARC) jack
1 (side)
Supports JPEG and firmware upgrade
1 (side)
No
1 (side)
1 (optical) (side)
No
No
Number: 2
Watts per channel: 5W
On: 60W
Standby: <0.5W
AC 120 V, 60Hz
English, French, Spanish
Yes
No
No
No
Stand column to TV screen:
M4 type (12 mm length) (2 pcs)
T4 type (12 mm length) (2 pcs)
Base to stand column:
T4 type (12 mm length) (4 pcs)
Yes
Yes
Yes
400 × 200
M6 type
www.insigniaproducts.com

Legal notices

FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Warning
Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate this
equipment.
Cables
Connections to this device must be made with shielded cables with
metallic RF/EMI connector hoods to maintain compliance with FCC Rules
and Regulations.
Canadian Notice
CAN ICES-3 (B)/NMB-3(B)
Standard Television Receiving Apparatus — Appareil de réception
télévision ordinaire, Canada BETS-7 / NTMR-7
IC Statement
This device complies with Industry Canada licence-exempt RSS
standard(s).
Operation is subject to the following two conditions: (1) this device may
not cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
This equipment complies with IC radiation exposure limits set forth for an
uncontrolled environment.
Dolby License Notice and Trademark Acknowledgement
Manufactured under license from Dolby
Laboratories. Dolby and the double-D symbol
are trademarks of Dolby Laboratories.
HDMI
The terms HDMI and HDMI High-Definition
Multimedia Interface, and the HDMI Logo are
trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other
countries.