Each Use - Dualit Stand Mixer Instruction Manual & Guarantee

each USe

Always ensure the attachment and bowl are locked firmly in place.
1 UNPlUg 2
Before you assemble the Press the head release
Stand Mixer, ensure that the button. this will release the
power cord is unplugged, mixer head out of its locked
and placed facing you on a position. ease the mixer
dry, level surface. head backwards until it locks
into its tilt position.
4 lOCk 5
ATTAChMENT
Push the attachment Place bowl on the base with
upwards over the locking the handle aligned to the
pin and turn clockwise until unlocked mark on the mixer
securely locked in place. base.
RElEASE hEAd 3 AlIgN
ATTAChMENT
Select the desired
attachment to suit the mixing
task (see page 7). align the
groove in the top of the
attachment into the locking
pin on the drive shaft.
lOCATE bOwl lOCk bOwl
6
Gently rotate the bowl in a
clockwise direction until it
locks into position. the bowl
should feel firm with no
movement.
08
7 Add INgREdIENTS 8
add ingredients to the always ensure splashguard
mixing bowl. Press the head is in place before you start
release button to unlock the mixing. Ingredients can be
head and lower it into the added through the pouring
mixing bowl. See page 12 for chute.
maximum loading quantities
10 START 11
turn the speed control dial If the mixer head is tilted
clockwise to start mixing. upwards during operation, the
the LcD will display the mixer will automatically stop.
selected speed setting. to resume mixing, lock the
mixer head back down and
press the Pause/Start button.
SPlAShgUARd 9 MAIN POwER ON
ensure the speed control dial
is turned to '0'. Tie back
long hair & remove
any loose jewellery or
clothing. Plug in the power
cord. a beep will sound and
the LcD screen will light up.
MIxER hEAd STOP
12
When mixing is complete,
turn the speed control dial
anti-clockwise to the '0'
position. Unplug the cord
from the power outlet.
09