Indesit IWC 81481 Instructions For Use Manual

Indesit IWC 81481 Instructions For Use Manual

Hide thumbs Also See for IWC 81481:

Advertisement

Advertisement

Table of Contents
loading

Summary of Contents for Indesit IWC 81481

  • Page 1: Table Of Contents

    Cleaning the pump Checking the water inlet hose Precautions and tips, 7 General safety Disposal Description of the washing machine IWC 81481 and starting a wash cycle, 8-9 Control panel Indicator lights Starting a wash cycle Wash cycles, 10 Table of wash cycles...
  • Page 2: Installation

    Installation ! Keep this instruction manual in a safe place for vibrations, noise and shifting during operation. If future reference. Should the appliance be sold, tran- it is placed on a fitted or loose carpet, adjust the sferred or moved, make sure the instruction manual feet in such a way as to allow enough room for accompanies the washing machine to inform the ventilation beneath the washing machine.
  • Page 3: Connecting The Drain Hose

    Connecting the drain hose • the supply voltage is included within the values indicated on the Technical Data Plate fixed on Connect the drain the machine. hose, without bending it, to a draining duct or • the socket is compatible with the washing a wall drain situated machine’s plug.
  • Page 4: The First Wash Cycle

    If you are in any doubt regarding the electrical Technical data supply to your machine, consult a qualified electrician before use. IWC 81481 Model How to connect an alternative plug: width 59.5 cm The wires in this mains lead are coloured in...
  • Page 6: Care And Maintenance

    Care and maintenance Cutting off the water and electri- 2. unscrew the lid city supplies by rotating it anti- clockwise (see figu- • Turn off the water tap after every wash cycle. re): a little water may This will limit wear on the hydraulic system trickle out.
  • Page 7: Precautions And Tips

    Precautions and tips This washing machine was designed and constructed in Consumers should contact their local authority or retailer accordance with international safety regulations. The fol- for information concerning the correct disposal of their lowing information is provided for safety reasons and must old appliance.
  • Page 8: Description Of The Washing Machine And Starting A Wash Cycle

    Description of the washing machine and starting a wash cycle Control panel WASH CYCLE PROGRESS/ DELAY TIMER indicator lights FUNCTION START/PAUSE ON/OFF button buttons with button with indicator lights indicator light TEMPERATURE DOOR LOCKED knob Detergent dispenser drawer indicator light WASH CYCLE SPIN SPEED knob...
  • Page 9: Indicator Lights

    Indicator lights Wash cycle phase indicator lights Once the desired wash cycle has been selected and has be- gun, the indicator lights switch on one by one to indicate which The indicator lights provide important information. phase of the cycle is currently in progress. This is what they can tell you: Wash Delayed start...
  • Page 10: Wash Cycles

    Wash cycles Table of wash cycles Detergents Max. Max. Description of the wash cycle temp. speed (°C) (rpm) Fabric Wash softener Daily White Cotton: extremely soiled whites. 90° 1400 2,45 175’   Cotton Standard (1): heavily soiled whites and resistant colours. 60°...
  • Page 11: Personalisation

    Personalisation Setting the temperature Turn the TEMPERATURE knob to set the wash temperature (see Table of wash cycles). The temperature may be lowered, or even set to a cold wash The washing machine will automatically prevent you from selecting a temperature which is higher than the maximum value set for each wash cycle.
  • Page 12: Detergents And Laundry

    Detergents and laundry Detergent dispenser drawer Garments requiring special care Outwear (wash cycle 9): is studied for washing water- Good washing results also depend on the correct dose of repellent fabrics and winter jackets (e.g. Gore-Tex, polyester, detergent: adding too much detergent will not necessa- nylon);...
  • Page 13: Troubleshooting

    Troubleshooting Your washing machine could fail to work. Before contacting the Technical Assistance Centre (see “Assistance”), make sure that the problem cannot be solved easily using the following list. Problem: Possible causes / Solutions: The machine does not switch on. •...
  • Page 14 The machine is noisy. • There will always be some motor, pump and drum noise during spin. The machine wont spin properly. • Out of Balance detected when attempting to go into a spin cycle - If this happens the machine will continue to try to repeat the distribution of the load required before the machine will go into higher spin speeds - This will increase the programme time accordingly.
  • Page 15: Assistance

    5 Year Parts Guarantee Indesit also offers you a free 5 year parts guarantee. This additional guarantee is conditional on you registering your appliance with us and the parts being fitted by one of our authorised engineers. There will be a charge for our engineer’s time. To...
  • Page 16: After Sales Service

    195116280.00 07/2013 - Xerox Fabriano After Sales Service No one is better placed to care for your Indesit appliance during the course of its working life than us - the manufacturer. Essential Contact Information Indesit Service We are the largest service team in Europe offering you access to 400 skilled telephone advisors and 1100 fully qualified engineers on call to ensure you receive fast, reliable, local service.

Table of Contents