Table of Contents
Advertisement
(HDMI-CEC)
Check if the device
is an Anynet+
device.
The Anynet+
system
supports
Anynet+
devices
only.
Only one external
device may be connected
to Receiver.
Check if the power
cord of the Anynet+
device
is properly
connected.
Check the cable connections
of the Anynet+
device.
Anynet+
does not
Navigate
to the System
menu and verify
that Anynet+
(HDM_-CEC)
is set to On.
work.
Check whether
the TV remote
panel is in TV mode.
Check whether
the remote
panel is Anynet+
compatible.
Anynet+
may not function
under certain
circumstances.
(Searching
channels,
operating
Smart
Hub or Setup,
etc.)
If you have disconnected
and then reconnected
the HDMI cable, scan for devices
again
or turn your TV off and on.
Check if the Anynet+
device
is properly
connected
to the TV and then navigate
to
I want to start
the System
menu to see if Anynet+
(HDM_-CEC)
is set to On.
Anynet+.
After
checking,
select the virtual
remote
panel's
TOOLS button
to display
the list.
Select Anynet+
(HDMJ=CEC)
from the list.
Select View TV from the Anynet+
menu.
I want to exit Anynet+.
Select a non-Anynet+
device from
Source.
The message
"Connecting
to
Anynet+
device..."
or "Disconnecting
from Anynet+
device"
appears
on the screen.
i
You cannot
use the remote
panel when you are configuring
Anynet+
or switching
to a viewing
mode.
Use the remote
panel after the TV has completed
the Anynet+
configuration
or has switched
to a viewing
mode.
The Anynet+
device
You cannot
use the play function
when Setup
is progress.
won't
play.
Check whether
the device
supports
Anynet+.
Check whether
the HDMI cable is properly
connected.
Navigate
to the System
menu and verify
that Anynet+
(HDM_-CEC)
is set to On.
Scan for Anynet+
devices
again.
The connected
device
is not displayed.
Anynet+
devices
must be connected
to the TV using
an HDMI
cable. Make sure the
device
is connected
to your TV with
an HDMI cable.
Some HDMI cables may not
support
Anynet+.
If the connection
is terminated
because
there has been a power failure
or the HDMI
cable has been disconnected,
please scan for the device again.
Connect
an optical
cable to the TV and the receiver.
The TV audio is not
ARC enables
digital
sound to be output
via the HDMI (ARC) port.
being played
through
However, ARC is only available
when the TV is connected
to an audio
receiver
that
the receiver.
supports
ARC.
Hide quick links:
Advertisement
Table of Contents
