The
check
list
for
wired
network
connection
failure
When
wired
network
connection
failed,
try
to
apply
the
following
information
to
each
issue,
No network cable found.
IP auto setting failed.
•
Check that your network cable is plugged in.
•
If it is connected, make sure that the router is turned on; if it is on, try
turning it off and on again.
Try the following to set your IP address automatically or set your IP
address manually by selecting _P Settings.
,, Ensure DHCP server is enabled on router and unplug and re-plug-in
the router.
•
Contact your Internet Service Provider for more information.