Child Lock - Samsung DV520AEP/XAA Manual

....... TheWrinkleToAdjustdownPressintermittentin the add indicator theManualuntil orTime Prevent Wrinklesubtract the tumbling - light Dry desired Time -Wrinkle cycles Preventabove time can intime unheated from (Timethe be b uttonPrevent is a dded pad the displayed. Dry, cycle, towillair provides or Quick activate at illuminate subtracted the press Dry, end approximately this the or when of f eature. AirAdjustfrom theFluff Wrinkle cycle the Time cycles), automatically1 to 80 Prevent arrow reduce minutes pad is w rinkling, ofselected, set up ortimes
_j _w _ ................................... The load is dry, and can be removed at any time during the Wrinkle Prevent cycle.
My Cycle - Choose your favorite cycle including cycle, temp, dry level option,
etc. (See page 27 for detail.)
Rack Dry - Rack Dry is available at Time Dry cycle. Temperature will be set only
to Extra Low. (See page 28 for detail.)
Mixed Load Bell - This is an alarm that notifies the user of the time when the
average dry level is damp dry (80% dried) when the laundry contains various
types of cloth. An alarm is sounded for five (5) seconds while continuing to
perform the cycle.
This function can only be selected in the Sensor Dry course, and the dry level can
only be selected from among Normal Dry, More Dry,and Very Dry.
Press to pause and restart programs.
Press once to turn your dryer on, press again to turn it off. Ifyour dryer is left
on for more than 10 minutes without any buttons being touched, the power
automatically turns off.
CHILD LOCK
A function to prevent children from playing with your dryer.
Setting/Releasing
If you want to set or release the Child Lock, press both the Temp. and Time buttons
simultaneously for 3 seconds.
How to Set:
1. It can be set while your dryer is running.
2. Once you set the Child Lock function, no button, except for the Power button, will respond
until you release the Child Lock function.
3. The Child Lock indicator will be lit.
1. If the dryer is powered on again, the Child Lock function stays on.
2. To release that function, follow the instructions above.
[_ hen other buttons, except for the Power button, do not respond, check the Child Lock
indicator.
26 operatng hstructions, tps