Yukon DSAS Manual

INSTRUCTIONS
Yukon's new Directional Sound Amplification System (DSAS) is a highly sophisticated
professional amplification device designed for enhanced listening and recording of distant
or faint sounds. DSAS Yukon can be attached to all optical products that have a 1/4'' inch
mount. Portability between optical devises gives the DSAS owner the luxury of combining
the most appropriate optical scope with a sound amplification system best suited for each
specific application.
USE AND TESTING
1. Remove the DSAS Yukon from its carrying case.
2. Insert the battery into the battery compartment (1) according to the markings on the inside.
3. Connect the Directional Antenna (9).
4. Connect the headset to the output jack (2).
5. Place headset speakers on ears and activate the device by depressing the "ON" button.
6. Adjust sound amplification volume to an optimal level by changing the equalizer adjuster.
7. Direct the DSAS's microphone towards the source of sound.
8. For recording purposes insert the connector into recording jack (5) and begin recording.
9. Follow instructions in your recorder's manual. To connect the DSAS Yukon to other optical
devices push the head of the screw (6) until the 1/4'' mount is moved out. Attach the unit to
the tripod socket of your optics.
10. Mount the DSAS Yukon on a tripod with the tripod socket (7).
11. To turn off the DSAS press the "ON/OFF" button. Always check the LED indicator light (8)
it will turn off when the system is off.