Page 2
16) La fiche principale doit être débranchée avant toute opération d’entretien. MORE INFORMATION For warranty and service information, please contact your local Markbass distributor (contact information available at www.markbass.it). For more technical information, please visit us at www.markbass.it and fill out the form on the Contact Us page.
Page 3
2.MOMARK MODULES ASSEMBLY INSTRUCTION Prior to installing and/or removing modules, be sure to turn the unit off AND unplug it from the power source. Do not connect the unit to a power source unless all three modules are installed in the amp frame. Insert the tool (1) supplied with the modules into the two holes on the front panel of the module.
Page 4
100 V; 120 V; 230 V; 240 V (voltage is factory preset according to region of sale) Markbass amps/combos was manufactured to be sold and used in the country of purchase, and is factory preset to that country’s voltage. Due to homologation issues, the voltage may not be changed.