Customizing Your Device
Calibrating the Barometric
altimeter
You can manually calibrate the
barometric altimeter if you know
the correct elevation or the correct
pressure.
1. Select Setup > Altimeter.
2. Select Altimeter Calibration.
3. Follow the on-screen instructions.
Geocache Settings
Select Setup > Geocaches.
• Geocache List—allows you to
display the geocache list by names
or codes.
• Found Geocaches—allows you
to edit the number of geocaches
found. This number automatically
increases as you log a find.
• Filter—filters a geocache list for
certain factors, such as level of
difficulty.
34
• chirp
Searching—turns on or off
™
chirp searching. A chirp is a small
accessory that you can program and
leave in a geocache.
• Program chirp
chirp accessory. See the chirp
Owner's Manual at
.com.
Routing Settings
Select Setup > Routing.
• Guidance Method—sets the
calculation and guidance method
for your routes.
◦ off Road—calculates point-to-
point routes.
◦ on Road For time—calculates
on-road routes that require
minimal time to drive.
◦ on Road For Distance—
calculates on-road routes that
are shorter in distance.
Rino 600 Series Owner's Manual
—programs the
™
www.garmin