Samsung ML-1665 Service Manual page 64

Alignment and Troubleshooting
2) JAM 1
Description : 1. Recording paper is jammed in front of or inside the fuser.
2. Recording paper is stuck in the discharge roller and in the fuser just after
passing through the Actuator-Feed.
1. If the paper is
jammed in front of or inside the fuser.
Replace the fuser unit.
2. If the recording
paper is stuck in the discharge
Reassemble the Actuator-Feed
roller and the fuser just after passing
and Spring-Actuator if the returning
through the Actuator-Feed, Feed
is bad.
Actuator may be
defective.
4-16
Service Manual
Samsung Electronics