Specifications; Install The Hardware - Axis Q7920 Installation Manual

Specifications

Operating Conditions
The AXIS Q7920 is intended for indoor use only.
Product
AXIS Q7920
Power Consumption
Product
AXIS Q7920

Install the Hardware

General Placement Requirements
• Power source within 1.8 meters.
• There must be a minimum of 5 cm free space on the bottom, front, rear and on both
sides of the AXIS Q7920 to ensure adequate ventilation.
• Do not stack other units or objects directly on top of the AXIS Q7920. The mounting
brackets are not designed to support more than 1 unit.
• No excessive dust.
Connect Power
The AXIS Q7920 has two On/Off switches. To switch off power to the AXIS Q7920 both power
supplies must be switched off.
Before switching on power to the AXIS Q7920, make sure the unit is properly grounded by using
the grounding screw.
Ensure that the correct AC power cord for your region is used.
Temperature
0 °C to 45 °C
(32 °F to 113 °F
AC
100–240 V AC, max 365 W
10
AXIS Q7920 Chassis
Humidity
10-85% RH (non-condensing)