Cycle Option Buttons - LG DLEX2801W Owner's Manual

OW TO USE
CYCLE OPTION BUTTONS
Your dryer features several additional cycle
options to customize cycles to meet your
individual needs. Certain option buttons also
feature a special function (see the following page
for details) that can be activated by pressing and
holding that option button for 3 seconds.
TO
0
0
0
Add Cycle Options to a Cycle:
Turn on the dryer and turn the cycle selector
knob to select the desired cycle.
Use the cycle settings buttons to adjust the
settings for that cycle.
Press the cycle option button(s) for the
option you would like to add. A confirmation
message will be shown in the display.
O Press the START/PAUSE button start the
to
cycle. The dryer will start automatically.
ANTI BACTERIAL
This option will add a high heat setting
to reduce bacteria. It can only be used
with the HEAVY DUTY, Co-IrON/
TOWELS, and NORMAL cycles.
NOTE: Do not use this cycle with delicate fabrics.
SF_J Certified by NSF
NSF International (formerly the National Sanitation Foundation),
certifies that ANTIBACTERIAL Option reduces 99.9%of bacteria on
laundry, and none of bacteria will carry over onto the next laundry load.
WRINKLE CARE
Selecting this option will tumble the
load periodically for up to 3 hours after
the selected cycle, or until the door
is opened. This is helpful in preventing wrinkles
when you are unable to immediately remove
items from the dryer.
DAMP DRY BEEP
With this option, the dryer will beep
when the load is approximately 80%
dry. This allows you to remove
faster-drying lightweight items or items that you
would like to iron or hang while still slightly damp.
5O