Troubleshooting - Element ELEFT193 Instruction Manual

TROUBLESHOOTING

If your TV does not operate normally or cannot be turned on, please check
the following troubleshooting questions. Remember also to check any other
connected electronic device, such as DVD or blu-ray player to pinpoint the
problem. If the TV still fails to operate normally, please contact technical support
(Refer to Warraty page).
SYMPTOM
Dead. No LED lit
Dead. No LED lit red
Blue screen
Noisy, snowy, ghosting
picture (TV)
No sound
22
POSSIBLE CAUSE
No power to the TV.
Set in standby mode.
No signal.
Incorrect
source selected.
Poor antenna signal.
Sound "Mute".
Volume set too low.
External leads
not connected "if used".
REMEDY
• Check all connections to the
TV's AC socket.
• Press either the Power button
or the Standby button on the
remote control.
• Press the SOURCE button to
select the correct source.
• If using an indoor antenna, try
adjusting the antenna position.
Check antenna connections.
• Turn sound "Mute" off.
• Check volume settings.
• Check that all external leads
are connected properly.