Advertisement
Index
-
Videos
- Trimming Video
This area enables you to remove unwanted portions of your video and select a video frame to be used as your
chapter thumbnail within the menu.
Trimming video
Standard playback controls are available to trim your video :
1.
Use the preview controls (ie. play/pause/forward/backward) to advance to the exact start of the
section you'd like to trim.
Note: For video files longer than 10 minutes, a "seek" bar appears beneath the time bar to indicate your
current position relative to the entire video file.
2.
Click the "Mark In" button (next to the scissor icon).
3.
Use the preview controls (ie. play/pause/forward/backward) to advance to the exact end of the section
you'd like to trim.
4.
Click the "Mark Out" button to define the area to be trimmed out of your video.
Note: You can remove multiple sections of a video by repeating steps 1- 4 over other areas of the video
track.
Use the Undo button if you've made a mistake while editing.
l
Press the "Reset" button to remove all trimmed areas and restore the video to its full length.
l
The buttons beneath the "Mark In" and "Mark Out" buttons can be used to jump to the previous/next
l
edits on the timer.
For video files longer than 10 minutes, a "seek" bar appears beneath the time bar to indicate your
l
current position relative to the entire video file.
Setting the chapter button thumbnail
Using the Play/Pause controls, click "Pause" when you come to the exact scene you want to use as your
chapter button on your DVD menu, then click "Set Thumbnail."
©ION Inc. All rights reserved.
Page 6
Advertisement
