Yukon 29032 Information

The Compact Head Mount (SKU #29032) is designed for joint use with NVMT devices (24024, 24021,
24021WP models are recommended), Challenger and others. This allows hands-free operation of the
night vision device in partial and complete darkness. The Head Mount ensures stable positioning of a
night vision device in front of the user's eyes, even while in fast motion (pacing, running, abrupt
movements). The Head Mount is simple and convenient to use. All adjustments, such as 90° raise of
the unit, set the night vision device's position in the "forward-backward" and "right-left" directions
relative to the eyes are made by one hand.
PACKAGE CONTENTS:
• Head Mount with an adapter
• User manual
• Carrying case
For improvement purposes, design of this product is subject to change.
OPERATION
1) Adjust the size of the mask to fit your head using the straps. The mount must closely fit your head.
2) Affix the night vision device to the adapter (2) using the screw (1) (or two screws - depending on the
adapter).
3) To adjust the position of the unit relative to the eyes, loosen the knobs (3), (4) and move the unit
longitudinally, upwards and downwards adjusting its inclination angle. As you find the most
comfortable position tighten the knobs (3), (4) to fix the setting.
4) To watch objects without the unit, place the unit vertically by pressing and holding the button (5).
5) When you are finished using the unit, remove the night vision device from the head mount by simply
unfastening the screws (1).
STORAGE
Always store the Head Mount in its case in a dry well-ventilated and well-heated room away from
heating/air conditioning vents.