GE EER3000 Owner's Manual page 23

Cleaningthe glass cooktop. .GEAppliances.com
Cleanyourcooktepafter
each spill.
Normal Daily Use Cleaning
ONLY use the recommended cleaning
(ream, Cerama BD_te'P, on tile glass
cooktop. Other creams may not be as
effective.
To maintain and protect the surf:ace of
your glass cooktop, fi)llow these steps:
[] Befine using tile (ooktop for tile
first time, clean it _4tll tlle cooktop
cleaning cream. This helps protect
tlle top and makes clean-up easier.
[] Dailyuse of tim cooktop cleaning
cream _411 help keep the (ooktop
looking new.
[] Shake tlle cleaning cream well.
Apply a tew (hops of tile cream
dire(fly to tlle (ooktop.
[] Use a paper towel or sponge to clean
the entire cooktop smface.
NOTE:It la veryimportantthat youDONOT
heat the cooktopuntil it hasbeencleaned
thoroughly
Scotch-Brite¢_ Multi-Purpose
No Scratch blue scrub sponge
Burned-On Residue
WARNING:DAMAGE to yourglasssurface
may occurif youusescrubpadsother than
BLUEScotch-Brite ® Multi-Purpose No Scratch
scrubspongesby3M.
[] Allow the (ooktop to (ool.
[] Spread a few drops of Cerama
Bute <':' to the entire burned residue
alea.
[] Using tlle scrub sponge, rub the
residue area, applying pressure as
needed.
[] If any residue remains, repeat tile
steps listed above as needed.
[] For additional protection, after
all residue has been removed,
polish the entire surface xdth
( erama IhTte <'' a nd a paper towel.
Heavy, Burned-On Residue
' _/ [] Allow d_e cooku)p u) cool.
o.-_ [] Spread a few drops of Cerama
Brvtd' u_ fl_e entire burned residue
[] Hokl the razor scraper at
approximately a 45 ° angle against
tl,e glass surti_ce and scrape d_e
soil. II will be necessary U) apply
pressure It) the razor scraper in
order u) remove il}e residue.
The RAZORSCRAPER is available
through our Parts Center. See
instructions under "To Order Parts"
section on next page.
[]
[]
Keep a small amount of cream on
fl_e residue as you s(rape.
After scraping with the razor
scraper, use [lie s(illb sponge 1o
remove any remaining residue.
[] For additional protection, after all
residue has been removed, polish
tlle entire smtit(e wid_ Celalll;4
Bryte < and a paper towel
NOTE:Razor blade is packedinverted for
safety reasons.Prior to use, theblade mustbe
rotated and reinsertedinto slot. Donot usea
dull or nickedblade.
23