Poor Reception on Some Channels
The Remote Control does not work
TV Shuts Off
No CATV Reception
Closed Caption is not activated
Troubleshooting
Check for possible sources of interference.
The channel or cable TV broadcast is experiencing problems. Tune to another channel.
Make sure that channels are set into memory
The network signal is weak. Adjust the antenna to receive a better reception
Check for possible sources of interference.
Batteries may be weak, dead, or inserted incorrectly.
Point the remote control directly at the IR sensor on the TV with an angle of 35 degrees.
Remove any obstacles between the remote control and the TV.
Remote control is out of range. Move closer to the TV.
Sleep timer is set.
Power is interrupted.
Check all cable TV connections.
Set the TV Mode in Channel menu.
The channel/program is not a closed caption broadcast. Try another channel.
Enable Closed Caption in the Menu.
52